Use and maintenance of the medical turnover box If the medical turnover box is used according to the correct use specifications, it can not only fully exert its own functions, but also prolong its service life and reduce the procurement cost of the medical turnover box.
Pay attention to the following points when using the medical turnover box:
1. The plastic tray should be placed gently to avoid uneven force and damage when landing. Welcome to the company ***http://
2. When placing the goods, they should be placed evenly to avoid the sharp surface directly pressing on the bottom of the turnover box. Side impact or damage may occur due to uneven force. In more serious cases, the goods in the box will be damaged.
3. When using the matching tray, it should be considered whether the size of the turnover box is suitable for the use of this plastic tray, to avoid the size is not suitable, and the side or the box is not properly placed.
4, when stacking, should consider the weight of its own turnover box, the stacking height limit is the most.
The correct use of the medical turnover box should be such that the weight of the single box does not exceed 25KG (normal human body is limited), and the box cannot be filled. At least 20mm should be left (the part of the upper joint is removed) to prevent the goods from directly contacting the bottom of the box. To damage or contaminate the product. The medical tote combination code is placed on a plastic pallet with appropriate strapping and wrapping to facilitate mechanical loading and unloading and transportation to meet loading, unloading, transportation and storage requirements. In order to make the medical container safe for long-term use, it is desirable to use the plastic tray correctly as follows:
1. The medical turnover box should be protected from sun exposure to avoid aging and shorten the service life.
2. It is strictly forbidden to throw the goods from a high place in the medical turnover box. Reasonably determine how the goods are stacked in the tote. Place the goods evenly, do not concentrate on stacking, eccentric stacking.
3. It is strictly forbidden to throw the medical turnover box from a high place to avoid the breakage and crack of the turnover box caused by the violent impact.
4. When working in a forklift or manual hydraulic truck, the fork thorns can be moved up as far as possible to change the angle. The fork thorn should not hit the side of the tray to avoid causing the broken tray to indirectly damage the tote and cargo.
5. When the pallet is on the shelf, the shelf type pallet must be used. The carrying capacity is determined according to the shelf structure, and overloading is strictly prohibited.

Nylon and Steel Gear Rack

Nylon And Steel Gear Rack ,Powder Coated D Latch For Gate ,Steel D Latch For Swing Gate ,Industrial Door Roller

Jiaxing Gates Hardware Products Co.,Ltd , https://www.888gates.com