Lamp warm warm PK heating buy doorway
If you use Yuba for a long time, strong light will cause light pollution. Therefore, it is best to use high-quality soft light bulbs. Soft lighting and long life.
â—† As the high-power light bulbs often switch off the conductive ring of the lamp holder, a good bathroom heater is generally made of a conjoined porcelain seat, which can ensure long-term use of the user and relieve the maintenance of the lamp holder.
1, warm bath
Look at the appearance
The bulb should be made of quartz hard glass, with high thermal efficiency, power saving, and reliability. There should be a protective net outside the heating foam. The filament should be made of high-quality tungsten alloy. The color of the bulb light can be observed. The light emitted by a good infrared light bulb is reddish, while the poor quality is shiny and dazzling. High-quality Yuba is generally made of a screw connection between the lamp cap and the bulb, which is relatively firm.
A good mask not only has a moderate thickness, but also has a smooth surface and is resistant to high temperatures and high flame retardancy. Finally, attention should also be paid to checking the appearance of the process, requiring stainless steel, paint parts, plastic parts, glass crucibles, plated parts, etc. The surface is even and bright, no shedding, no dents, or severe scratches, squeezing marks, and the appearance is beautiful.
Look at space
Generally, the power of the heating bulb of the Yuba is about 275W, so the bath of the two bulbs is suitable for a bathroom of about 3 square meters, and the bath of the four lamps is suitable for a bathroom of about 5-8 square meters.
2, warm wind Yuba
The warm wind consists of a panel, two or four sets of PTC heating ceramics, generally with a power of 2000W, a reversing motor, and some with a small motor.
Good quality PTC heating element, its heat-dissipating aluminum strips are regular, the ceramic heating plate is complete, the applied connection glue has a smooth appearance, and the PTC works with uniform heat, no redness, and no unpleasant gas emission. Poor quality PTC heating elements are blackened aluminum strips, ceramic wafers are not uniform, the glue overflows, there is a coke odor when working and so on.
Warm PK warm
Lamp warmth: Fast heating, low power consumption
Lamp heating defects: small radiation range, uneven temperature. The brightness is too high, and the light glare affects the baby's vision development
Wind warmth: The heat is gentle, and the scalp won't get hot when bathed
Disadvantages of warm air: slow heating, only partially heated
Ceilings Integrated ceilings Ceilings Electrical glass Bathroom switch Paint Space craft glass
In warehouse loading dock, dock leveler is used to create a bridge between lorry floor and warehouse floor. Then forklifts or pallet truck can directly drive into container for loading or unloading.
We supply several different types dock levelers, including Fixed hinged lip hydraulic dock leveler, Mechanical dock leveler, Telescopic dock leveler and Manual edge of dock leveler.
Dock Leveler,Loading Dock Leveler,Hydraulic Dock Leveler, Mechanical Dock Leveler, Manual Edge Dock Leveler, Dock Leveller, Warehouse Dock Leveler
SHANGHAI KENVO DOOR CO.,LTD , https://www.kenvodoor.com