Labor insurance supplies anti-static clothing need to know

In everyday life, we pay more attention to safety when using labor protection products and antistatic clothing, and pay attention to the following aspects to ensure everyone's safety. I hope everyone understands before using it:
First, anti-static clothing In order to prevent the accumulation of electrostatic clothing, work clothes made of anti-static fabrics for sewing fabrics for anti-static clothing. Wear requirements:
a. The areas of dangerous locations for gas explosion belong to Zone 0 and Zone 1, and the minimum ignition energy of flammables is below 0.25MJ. Antistatic clothing should be worn.
b. It is forbidden to attach or wear any metal objects on the antistatic clothing.
c, wear anti-static clothing, must wear matching with anti-static shoes.
d, prohibit the wearing of flammable and explosive places.
Second, anti-static rubber shoes can eliminate the accumulation of static electricity in the human body, but also can prevent the protection of the power shock below 250V shoes for anti-static shoes. Wear requirements:
a. Wear anti-static rubber shoes in places where the human body is charged with static electricity that may cause combustion or explosion, and where electrical equipment can accidentally cause electric shock and fire to the human body.
b. In order to ensure the elimination of the effect of static electricity on the human body, the resistance of the ground should not be greater than 1.0*108 ohms when wearing antistatic rubber shoes.
c. During the wearing process of shoes, thick insulating socks or insulated insoles cannot be worn at the same time.
d. During the wearing of shoes, the bottom of anti-static shoes should not be covered with insulating impurities.
Third, seat belt height operations workers Peza prevent falling injuries labor supplies for the seat belt. It consists of straps, ropes, and metal fittings.
a. Workers at heights must have their seat belts to work.
b. Seat belts should be hung low for use, and attention should be paid to preventing swing collisions. Longer ropes above 3M should be used with buffers.
c, buffer, speed difference device and self-locking hook can be used in series.
d, the various components on the seat belt must not be arbitrarily removed, pay attention to add a rope sleeve when replacing the new rope.
Fourth, the hat that protects the human head from external force and has a protective effect is a safety helmet. It consists of a cap shell, a cap liner, a lower jaw strap, and a rear hoop. Wear requirements:
a. Workers must wear safety helmets at worksites, overhaul work sites, or crossover work sites.
b. Wearing safety helmets in hazardous areas must be taped to prevent them from falling off.
c. If the cap or cap lining is aged or damaged, the impact resistance and penetration resistance are reduced, and no further use is required. Replace the new cap.