Britain's construction of stylish "amphibious house" floods can float
According to reports, a British construction company designed the first “Amphibious House†in the UK. This house can “rise in water and houseâ€, enabling homeowners not only to appreciate the beautiful scenery of the Thames, but also to avoid property damage caused by floods. .
A British construction company designed the first "Amphibious House" in the UK. This house can "rise in height".
It is reported that this "amphibious house" is only 10 meters away from the banks of the Thames, with an area of ​​about 225 square meters, and is expected to be completed within this year. The "Amphibious House" has 3 bedrooms and is designed to be stylish and environmentally friendly, in harmony with the surrounding scenery. It was built on a dock supported by four pillars. When the flood hits, the water pressure will cause the house to float to the surface, so it will not be flooded.
In addition, there are three terraces outside the house where plants such as reeds and shrubs that help absorb water are planted, as well as grasslands and gardens. Apart from the greening effect, progressive layers of designed drainage are effective and silting of the docks is avoided, and the rise of river water outside the house is shown. .
The cost of amphibious houses is estimated to be about 1.5 million pounds. Although it is 20% more expensive than a flat with the same area, it can save the owner a sum of insurance cost.
The Thames will break its banks every 20 years or so. In 2007, the rising of the river had flooded hundreds of houses.
Medical Industry Mass Flow Meter
Sealand is a professional manufacturer of Medical Mass Flow Meter, Medical Mass Flowmeter, Medical Coriolis Meter, Medical Flow Meter, Medical Flowmeter, ATEX, IECEx & CE approved.
There are 2 optical switches for operation. The SET and SELECT optical switches are used to navigate the transmitter display. To activate an optical switch, move your finger 1~2mm over the optical switch close to the glass.
Mark:
1. The display will timeout without any operation in 5 min.
2. During numbers input, the decimal point will come up automatically if the first digit is 0; if not 0, please activate SELECT until decimal point shows up.
The general operation is listed as follows.
|
On Main Interfaces |
Activate SET to alternate mass and volume values. |
|
Activate SELECT to alternate main interfaces. |
|
|
Long activate SELECT to go to Setup Interface. |
|
|
Long activate SET for total reset.
|
|
|
Back to Main Interface |
Long activate SET & SELECT at the same time.
|
|
Select Submenu, Parameters & Numbers |
Activate SELECT to select the submenu, parameters or numbers. |
|
Activate SET to go to submenu or save parameters/numbers. |
|
|
Save setup |
Long activate SET to save the modified setup. |
|
Back or Exit |
Long activate SELECT. |
Medical Mass Flow Meter, Medical Mass Flowmeter, Medical Coriolis Meter, Medical Flow Meter, Medical Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com