You can also see the “essence†of your house when you are inspecting the house.
For ordinary people, face inspection is often confused. How can we go through various tips to see clearly the "essence" of housing?
In fact, without a professional house inspection tool, we can also make a preliminary inspection of the quality of the house and pick the house as a "thorn."
Experts point out that you need to be a professional home inspector.
Expert support inspection room stunt
After the house arrives, the inspection process is indispensable.
Bring your own tools: a plastic wash basin, a small hammer, a 5 meter tape, a multimeter, a table tennis.
A look into the door
General home buyers and developers signed the purchase contract, all the entry door brand, specifications and other detailed regulations.
Buyers in the inspection of the entrance door, take a look at the actual delivery of the door, whether there is a difference with the contract; and carefully observe whether the entrance door surface cracks, whether leveling; more open several times to see if the door is smooth Check carefully the door locks for deformation or obstruction.
Second look at the area
Check whether the drawing of the sales contract is consistent with the reality, whether the structure is the same as the original design, whether the area of ​​the house has been actually measured by the real estate department, and whether there is any difference in the area signed with the contract.
First look at the sale of the contract, see the error between the number, generally 3%. Exceeding part of the treatment, the proposed contract is 2% error, but not more than 5% is better.
Three to see the ground flatness
It is impossible for the human eye to see if the ground in the house is flat. At this time, buyers can bring their own table tennis, on the ground, to see if the table tennis ball rolling. If the table tennis ball rolls to one side, it means that the ground is inclined. You can also use the small hammer that comes with you to gently tap on the ground and check whether the empty shell cracks on the ground. If you hear the voice of “emptyâ€, it means there is a gap on the ground and you need to rework; if you hear a dull knock, it means that they are in good contact. If there is any empty drums, it must be instructed to accompany the property personnel to repair them as soon as possible, otherwise it will be easy to pierce the floors during the renovation.
Four look at the form
Buyers carefully inspected all parts of the window for cracks with the naked eye and the accessories in the purchase contract were complete. Try to see if the doors and windows are open, visually check whether the doors and the door frames, the sides of the window and the window frames are parallel, and close the doors and windows to hear the sound insulation effect to understand the degree of sealing.
Second, look carefully at the window track for dust and debris. If any, you can't use brute force to pull the doors and windows, otherwise it will cause damage to the form. When you feel obstructive, take a closer look and clear immediately.
In addition, after the rain is a good time for inspection. At this time, you can see if there are any signs of leaks at the seams between the windows and the walls.
Five look at the wall
Check the flatness of the wall, see if it seeps, and if there is any crack. In particular, check whether there are any traces of water in the wall, especially the top of the kitchen, the outer wall, etc. If the color on the wall is found to be non-uniform, the paint on behalf of the wall is made up, and there should be a crack in the wall.
If there is a crack in the balcony, it is dangerous. If there is a crack in the connection between the room and the balcony, it is likely to be a sign of the breakage of the balcony, and the developer should be informed immediately of the rectification. If you are buying the top floor, be sure to check the top surface of each house for signs of rain leakage. If there is condensation on the wall in the winter room, there must be a problem with the insulation on the wall.
Six look at the room door
According to regulations, the width of the bedroom door shall not be less than 900 mm and the height shall not be less than 2 meters; the width of the bathroom door shall not be less than 700 mm and the height shall not be less than 2 meters; the width of the kitchen door shall not be less than 800 mm and the height shall not be less than 2 meters. . In general, height has little effect on people's lives. If the width does not meet the requirements, people can only go sideways after installing the door.
Seven to see the floor
Use the tape measure that comes with it to measure the layer height. When measuring, take multiple measurements in the house to see if the collected data are the same or if the error is too large. If the error is too large, it means that the roof is uneven. Measuring the floor height can also check if the actual area of ​​the house is shrinking.
At the same time, it is advisable to measure the water meter, meter number, building height, toilet pit distance, bath length and width, shower room size, ceiling height, and see if there is any difference between the data given by the developer and the data.
Eight look into the water
Bring your own plastic bag, sand, plastic basin. First, water the basin, the bathtub, the toilet, the kitchen and the toilet, and the balcony floor drain, etc. Basically, each sink should be filled with two basins of water. The sound of squeaking should be heard, and there should be no water on the surface. Representative drainage is in good condition.
Also check the toilet floor for leaks and water. You can use plastic bags filled with sand on the floor drain, and then put some water in the bathroom, about 2 cm high. After 24 hours, go to the corresponding lower bathroom to see if there is any leakage at the top.
9 look at water and gas
Open the tap to check for leaks, try to make the flow bigger and anxious. Let's take a look at the water pressure and try the drainage speed. Use a multimeter to measure whether each strong or weak power is unblocked. Close the gate and check if each gate completely controls each branch line. After the breaker is pulled off, see if the interior of the house is completely powered off, and check whether each branch gate completely controls each branch line. It is best to use a multimeter to measure the flow of each strong and weak electricity.
In addition, open the line interface of the telephone and TV, pull it hard, and look at the firmness of the socket to see if it is a virtual one.
Home Inspection Balcony Windows Doors and Windows Housing Room House Toilet Bedroom Door Kitchen Door Bedroom Design Drawing Bedroom Soundproof Door Kitchen Sliding Door Kitchen Bathroom Ceiling Bathroom Sliding Door Bathroom Door Bathroom Door Size Bathroom Size Bathroom Basin Washroom Bathroom Ceiling Bedroom Door Size Bedroom Door to Bedroom Door Bedroom
kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucet.com