How to install a weak home system?

(1) The weak current system, power and lighting circuits shall not be installed along with the pipe, the outlet box (excluding isolation in the middle), and the connection box.

1 The 5 ohm cable should be used for laying the cable system.

2 The telephone wiring can use the general plastic tube sheath line.

3 The home theater sound system should secretly apply dedicated speaker cables to surround speakers.

(2) The terminal boxes and outlet boxes used in the weak current system shall be the same series as the switch sockets in the power distribution system.

(3) Each channel of a cable TV subscriber line can be assigned to three terminals in a passive manner. When there are four terminals, active amplification distributors should be selected to distribute to each terminal.

TV NVC lighting switch socket lighting

Asphalt Tile

Asphalt roof tiles is a type of roof shingle that uses asphalt for waterproofing. It is one of the most widely used roofing covers in North America because it has a relatively inexpensive up-front cost and is fairly simple to install.

Two types of base materials are used to make asphalt tile, organic and fiberglass. Both are made in a similar manner, with an asphalt-saturated base covered on one or both sides with asphalt or modified-asphalt, the exposed surface impregnated with slate, schist, quartz, vitrified brick, stone,or ceramic granules, and the under-side treated with sand, talc or mica to prevent shingles from sticking to one-another before use.

Asphalt Tile,Asphalt Roof Tiles,Asphalt Floor Tiles,Bituminous Tiles

Xiamen Dahe PEB Construction Technology Co., Ltd. , https://www.dahecfsbuilding.com