Waterproof material tool application
How to use waterproof material tools:
I believe that everyone is familiar with waterproof coatings, especially those who have done renovations. Then let's talk about how to carry out waterproof materials in general.
1, the so-called sponge-like brush to tell. Under normal circumstances, it is wider than the surface of the rubber sheet brush. However, it is also used for the waterproof coating of polyurethane for construction, and of course, it can be applied to a large area by pressure application. For the brush, it is often also made for the sponge board.
2. If you have a smeared smear or a rubber trowel. Always use and plastering trowels can be used for pressing while using, but the material is often wiped a lot. If the force is too small, then the material is definitely a lot more, of course. It is controlled according to a fluidity of the material.
The four principles that should be considered when choosing a waterproof coating:
(1) According to the degree of deformation of the foundation, the structural form, the local annual temperature difference, the daily temperature difference and the vibration factor, the waterproof coating with appropriate tensile properties should be selected.
(2) According to the exposure degree of the roof waterproof coating film, the waterproof coating with the resistance to UV and heat aging should be selected.
(3) According to the local maximum temperature, minimum temperature, roof slope and conditions of use, water-resistant coatings with heat resistance and low temperature flexibility should be selected. In order to prevent runny or to avoid cold and brittle.
(4) When the roof drainage slope is greater than 25%, it is not advisable to use a waterproof coating with a long drying time.
It is the ultimate solution for DUST FREE sanding.
Sunplus Abrasives Co.,Ltd is a leading company in the field of researching and manufacturing premium quality coated abrasives for a wide range of applications.
Founded in 2004, Sunplus has developed into an enterprise with the leading fully - automated Germany system production line and technology to make high and stable quality sandpaper. All our materials are imported from Europe, Japan and Korea, which assures high quality products from the source.
We constantly invest in research and development so as to ensure that our products will always be a step ahead of competition.
Net Abrasives,Net Sand Paper,Net Abrasives Sanding,Net Abrasives Sandpaper
GUANGZHOU SUNPLUS TECHNOLOGY CO.,LTD , https://www.sunplussandpaper.com