Torque wrench tester using method
How to Use the Torque Wrench Tester 1. Before using the torque wrench tester, check whether the power of the instrument is sufficient. If the power is insufficient, charge it first (can also be used when charging).
2. Place the quadrilateral probe of the test object into the square hole of the tester and use the handle at the other end of the test object above the height adjustment block (if the length is not enough, the whole loading device can be adjusted freely) .
3. Turn on the power switch and the displayed torque value is zero. If it is not zero, press the clear key to clear the torque value.
4, before the test, you need to set the upper and lower limit value, a very small storage value, a very small peak value, automatic peak time, automatic shutdown time, gravity acceleration and so on.
1. Upper limit value setting: The user sets the upper limit value and set it freely according to the need. The upper limit value is the automatic sound and light prompt. The upper limit value is not higher than the full scale.
2. Lower limit value setting: The user sets the lower limit value, and it can be set freely according to the need. The lower limit value is the automatic light prompt, and the lower limit value cannot be higher than the set upper limit value.
3. Very small storage value setting: The user sets a very small storage value according to the storage needs, and data smaller than this value will not be stored.
4. Very small peak hold value setting: According to the peak value, the user needs to set the automatic peak measurement freely, and the data less than this value is not saved by the peak value.
5. Automatic peak time setting: The user can freely set from 1 second to 99 seconds according to the time required for the peak value in the automatic peak measurement state.
6, automatic shutdown time setting: No operation, automatic shutdown time from 0 minutes to 9 minutes can be freely set (when set to 0 minutes, it means to lift the automatic shutdown).
7. Gravity acceleration setting: The user can set the gravity acceleration value according to the location of this area. The default is 9.794.
8. Restore the initial settings: If the user does not operate properly or changes the data several times, you can use this setting to restore the data from 1 to 7 to the factory state.
20 years time, snapping fingers. Looking back at the company's 20 years of hard work, it was tempting to have a lot of emotion. The 20-year enterprise development is actually a course of study management, thinking management, management management, and creation management. It is a process of continuous accumulation of management wisdom.
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Wall Light,Up Down Wall Light,Mr16 Wall Light,Wall Light Fixture Led
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlighting.com