Research on development policy of building sanitary ceramics industry
In order to guide the building sanitary ceramics industry to change the development mode, promote industrial upgrading, and achieve healthy and sustainable development, the Department of Raw Materials Industry of the Ministry of Industry and Information Technology commissioned the Guangdong Ceramics Association to organize a working meeting on the development of the building sanitary ceramic industry policy research project in Guangzhou. Experts in key enterprises, institutes, institutions of higher learning participating in the research, as well as China Construction Sanitary Ceramics Industry Association, China Building Materials Federation, Guangdong Provincial Economic and Information Commission, Protection and Coordination Department of State Intellectual Property Office, and industry and information A total of more than 20 representatives of the Raw Materials Industry Division of the Chemical Industry Department attended the meeting. The meeting analyzed the development status, development opportunities and challenges of China's building sanitary ceramics industry, forecasted the development trend of the industry, emphatically analyzed the current problems and in-depth causes of the industry, and combed and put forward ideas for promoting stable economic operation and achieving healthy and sustainable development. With measures suggested.
The building sanitary ceramics industry is an industry with comparative advantages in China. Since the new century, China's building sanitary ceramics industry has continued to develop rapidly and has become the world's largest producer, consumer, and exporter. However, in advancing the construction of a resource-saving and environment-friendly society, the development of the industry faces many new challenges: First, excess capacity, repeated construction, homogenization, and low production concentration; second, the lack of self-owned brand creation, Lag, the development of the product's consumer product characteristics is insufficient; Third, the independent innovation capability is not strong, the key core technology is subject to the people, the unit of industrial added value energy consumption, high carbon dioxide emissions, dust management and dioxide *, nitrogen oxide emissions reduction task is arduous; Fourth, The cost of factors continues to rise, the constraints on the energy environment increase, and the national income created by the unit land area is difficult to grow rapidly. Fifth, the increase in trade frictions makes it more difficult to develop external markets.
Faced with new challenges, the conference believes that the building and sanitary ceramics industry must adhere to scientific development, take the path of new industrialization with Chinese characteristics, grasp the overall tone of steady progress, and integrate the transfer method, structural adjustment, innovation, and promotion of harmony to accelerate the transformation. upgrade. We must focus on promoting the development of the institutional environment, strengthen the coordination of industrial policies and land, environmental protection, fiscal and taxation, trade, investment, safety supervision and other policies, and vigorously create a favorable environment conducive to the development of building sanitary ceramics. It is necessary to push forward the construction of modern industrial systems, promote the overall upgrading of the entire industrial chain, shift to the high-end value chain, strengthen technological transformation, mergers and reorganizations, promote cleaner production and pollution control, increase the efficiency of resource utilization, and develop circular economy and remanufacturing industries, further enhancing Sustainable development capacity. We must focus on promoting innovation, strengthening key technologies and common technologies in the industry, establishing a technological innovation system that takes companies as the main body, and coordinating technical development, engineering, standard setting, application demonstration, and other aspects, focusing on the construction and protection of intellectual property rights, and continuously strengthening the core Competitiveness. We must focus on promoting integrated development, increase the informatization level of production processes, production equipment, and operations management, innovate business models, encourage personalized creativity, and accelerate the transition from a production and business model to digital, network, intelligent, and service-oriented. We must focus on promoting coordinated development, paying attention to the use of comparative advantages, and promoting the orderly transfer of industries. In accordance with the principles of “reasonable layout, distinctive features, intensive and efficient, and ecological environmental protectionâ€, the industry chain should be used as a link, and resource factors should be used as the basis to promote industrial agglomeration. Development, optimize the layout of productivity. We must focus on promoting reform and opening up, strive to create new competitive advantages in building sanitary ceramics, improve our position in the global division of labor, accelerate the pace of “going outâ€, make full use of two markets and two resources, and coordinate domestic industrial development and international industries. The division of labor encourages the deployment of resources and the integration of value chains on a global scale, and continuously strengthens the momentum and vitality of development.
The meeting believes that the current urgent need to proceed from the following aspects, effectively strengthen the industry management, go all out to stabilize growth and promote transformation. First, formulate and improve industrial policies, strengthen policy incentives and constraints, standardize industry access, strictly control capacity expansion, promote mergers and reorganizations, speed up the elimination of backwardness, and increase industrial concentration. The second is to speed up the revision of standards and regulations, encourage the development and guidance of new products, new technologies, new processes, and new equipment that support consumer energy conservation, material saving, water saving, land saving, and cleanliness, and promote the optimization of industrial structure.
The third is to intensify the promotion and implementation of related plans such as “Industrial Transformation and Upgrade Planning (2011-2015)†and “Twelfth Five-Year Development Plan of Building and Sanitary Ceramics Industry†to guide the orderly and scientific development of the industry. The fourth is to do a good job in monitoring the economic operation of the industry, regularly publish industry operation information, strengthen industry guidance, prevent blind investment, promote self-discipline in the industry, upgrade quality brands, and implement social responsibilities.
On the basis of full discussion, the meeting reached a consensus on the framework and research arrangements for the development policy of building sanitary ceramics industry. All participating personnel will fully advance the research work according to the division of labor and requirements to ensure that the task of the research task is completed on schedule and the building health is formulated. Ceramic industry policies provide strong support.
The building sanitary ceramics industry is an industry with comparative advantages in China. Since the new century, China's building sanitary ceramics industry has continued to develop rapidly and has become the world's largest producer, consumer, and exporter. However, in advancing the construction of a resource-saving and environment-friendly society, the development of the industry faces many new challenges: First, excess capacity, repeated construction, homogenization, and low production concentration; second, the lack of self-owned brand creation, Lag, the development of the product's consumer product characteristics is insufficient; Third, the independent innovation capability is not strong, the key core technology is subject to the people, the unit of industrial added value energy consumption, high carbon dioxide emissions, dust management and dioxide *, nitrogen oxide emissions reduction task is arduous; Fourth, The cost of factors continues to rise, the constraints on the energy environment increase, and the national income created by the unit land area is difficult to grow rapidly. Fifth, the increase in trade frictions makes it more difficult to develop external markets.
Faced with new challenges, the conference believes that the building and sanitary ceramics industry must adhere to scientific development, take the path of new industrialization with Chinese characteristics, grasp the overall tone of steady progress, and integrate the transfer method, structural adjustment, innovation, and promotion of harmony to accelerate the transformation. upgrade. We must focus on promoting the development of the institutional environment, strengthen the coordination of industrial policies and land, environmental protection, fiscal and taxation, trade, investment, safety supervision and other policies, and vigorously create a favorable environment conducive to the development of building sanitary ceramics. It is necessary to push forward the construction of modern industrial systems, promote the overall upgrading of the entire industrial chain, shift to the high-end value chain, strengthen technological transformation, mergers and reorganizations, promote cleaner production and pollution control, increase the efficiency of resource utilization, and develop circular economy and remanufacturing industries, further enhancing Sustainable development capacity. We must focus on promoting innovation, strengthening key technologies and common technologies in the industry, establishing a technological innovation system that takes companies as the main body, and coordinating technical development, engineering, standard setting, application demonstration, and other aspects, focusing on the construction and protection of intellectual property rights, and continuously strengthening the core Competitiveness. We must focus on promoting integrated development, increase the informatization level of production processes, production equipment, and operations management, innovate business models, encourage personalized creativity, and accelerate the transition from a production and business model to digital, network, intelligent, and service-oriented. We must focus on promoting coordinated development, paying attention to the use of comparative advantages, and promoting the orderly transfer of industries. In accordance with the principles of “reasonable layout, distinctive features, intensive and efficient, and ecological environmental protectionâ€, the industry chain should be used as a link, and resource factors should be used as the basis to promote industrial agglomeration. Development, optimize the layout of productivity. We must focus on promoting reform and opening up, strive to create new competitive advantages in building sanitary ceramics, improve our position in the global division of labor, accelerate the pace of “going outâ€, make full use of two markets and two resources, and coordinate domestic industrial development and international industries. The division of labor encourages the deployment of resources and the integration of value chains on a global scale, and continuously strengthens the momentum and vitality of development.
The meeting believes that the current urgent need to proceed from the following aspects, effectively strengthen the industry management, go all out to stabilize growth and promote transformation. First, formulate and improve industrial policies, strengthen policy incentives and constraints, standardize industry access, strictly control capacity expansion, promote mergers and reorganizations, speed up the elimination of backwardness, and increase industrial concentration. The second is to speed up the revision of standards and regulations, encourage the development and guidance of new products, new technologies, new processes, and new equipment that support consumer energy conservation, material saving, water saving, land saving, and cleanliness, and promote the optimization of industrial structure.
The third is to intensify the promotion and implementation of related plans such as “Industrial Transformation and Upgrade Planning (2011-2015)†and “Twelfth Five-Year Development Plan of Building and Sanitary Ceramics Industry†to guide the orderly and scientific development of the industry. The fourth is to do a good job in monitoring the economic operation of the industry, regularly publish industry operation information, strengthen industry guidance, prevent blind investment, promote self-discipline in the industry, upgrade quality brands, and implement social responsibilities.
On the basis of full discussion, the meeting reached a consensus on the framework and research arrangements for the development policy of building sanitary ceramics industry. All participating personnel will fully advance the research work according to the division of labor and requirements to ensure that the task of the research task is completed on schedule and the building health is formulated. Ceramic industry policies provide strong support.
The material of the led waterproof flood light body is the surface treatment of aluminum alloy die-casting and electrostatic spraying. The coating is resistant to high temperature, acid and alkali, and anti-aging. The waterproof outdoor flood lights body adopts the integrated design of light source and electrical appliances, with a compact structure and small volume. The reflective surface is designed to form light distribution for various needs, with high luminous efficiency and small glare light source.
According to customer needs, single-ended or double-ended metal halide lamps or high-pressure sodium lamps can be used. The led flood outdoor lighting head adopts tempered glass, which is safe, resistant to high temperature and high Good strength and light transmission The sealing strip is an anti-corrosion silicone rubber seal, which has good sealing performance, waterproof and dustproof applications. High performance magnetic ballasts, triggers and capacitors are suitable for signs, stadiums, squares, trees, billboards, parking lots Fields, building exterior walls, etc.
Led Waterproof Flood Light,Led Flood Outdoor Lighting,Waterproof Outdoor Flood Lights,Outdoor Led Flood Lights
WOSEN LIGHTING TECHNOLOGY LIMITED , https://www.wosenled.com