Reasonable home decoration six-word secret
>>>Links: Items for home improvement that require acceptance
Thin: Floor decoration materials should be thin as possible from the viewpoint of occupying less space and reducing floor load.
Thickness: In "Soft Decoration", some thick materials are very textured, such as bedspreads, sofa cushions, cushions, etc.; higher space, can build a higher "floor" to represent the spatial sense and area Sex.
Penetration: For the problem of insufficient indoor light, transparency can be enhanced between rooms.
Leakage: "Leaked carving" of furniture, ceilings, wall skirts, etc., can increase the mystery of the room and improve the quality of the decoration.
Thin: The use of furniture with a high height or vertical color bar, as well as decorative cloth and curtains with vertical lines, highlights the vertical structure.
Wrinkle: home decoration, safety first, if there are old people, young children, the ground should be preferred to have "wrinkle" of the "slip-resistant" material; second, with "folding", the surface of "rough" and some have texture and Simple, dynamic beauty, and noise absorption
>>>Links: Ten "Diseases" in Home Improvement
Nine points in home improvement:
First, woodworking production
1. The wooden door and window sheath, the wooden wall skirt and the baseboard of the skirting board must have a wood dragon skeleton or a bottom panel lining.
2. The skeleton of the dragon is fixed with an electric hammer or an impact drill to drill the wooden wedge on the wall and then level it.
3. The veneer board requires that the wood grain texture conforms to the same direction, and the joints must be handled strictly.
4. Use latex paint or adhesive to stick the surface material to the wooden keel with double-sided brushing, dry it to two-and-a-half minutes after pressing it, and press it out with a wooden block; use a thin nail or steam nail to cover the surface layer, nail head Should be embedded below the surface; the angle of the external wall combined with a 45 degree angle, two-way planing angle, does not allow the appearance to see the sheet immediately.
Second, wood paint
1. The color of the surface is correct, uniform, and the light is smooth and moderate. There is no teardrop, over-thickness, bottom-penetration, or blistering.
2. The borders of the paint are straight and straight, not out of bounds.
3. The gray wall did not see the protruding block and the corner was flat. The interface between the board and the board, board and wall must be affixed with a fiber tape to make it greasy.
4. Try not to paint on wet weather to prevent “sweat†quit.
Third, laying wallpaper
1. After brushing the wall, first brush the waterproof oil once. It must be polished 2 times. Each time it is sanded with No. 100 emery cloth. There must be a gap repair immediately, and the recessed position of the convex wall cannot be seen with the naked eye.
2. The wallpaper meets the mouth to be accurate, flat, and free from blistering.
3. With a sharp blade cut, there must be no tearing of the edges.
4. The wallpaper glue spills immediately with a clean towel.
Fourth, wall decoration
1. Put at least two scrapings on the wall. PuTTY is made of talcum powder and made of good quality 107 glue or diluted latex.
2, after each putty dry with 80 emery cloth.
3. Check the smoothness of the wall surface, use a straight wooden rod or aluminum material about 1.5 meters long, erect the wall surface, and observe the connection between the straight edge of the wooden rod or aluminum material and the wall surface. If the gap is too large, it indicates that the wall surface is uneven and convex and concave; if the gap is very small, it is a dark line, indicating that the wall surface is flat and in line with the standard.
Fifth, laying water pipes
1. Place the tube at the nearest distance, with at least the interface as the standard. The body should be straight and tidy, and bend and overlap as little as possible.
2. All indoor use galvanized pipe, hot water with plastic hose, PVC pipe for water, the interface should be wrapped with waterproof tape to prevent leakage.
3, install the basin and the toilet to the level and the four weeks.
4. To install faucets or fittings, use cloth tools. Do not use flowers and faucets.
5, kitchen, toilet to install floor drain to ensure that the ground is not water.
6, the installation is completed to test the water, no leakage, leakage, dripping phenomenon.
>>>Links: Purchase and Acceptance of Tiles
Six, tiled tiles
1. The tile surface should be flattened, the angle must be accurate, and the interface must be aligned.
2. Tiles should be soaked for half a day before use.
3. The floor of the kitchen and toilet should have a proper slope and no water can accumulate.
4. After wiping the white cement on the tile interface, use rattan brush. Do not leave cement on the tile surface.
5. After the tiles are finished, they must be covered with cardboard, etc., and walk at least 24 hours later.
Seven, lay the floor
1. The skeleton of the dragon is to be played before the wooden floor covering, and the dimensions are consistent with the floor specifications.
2. The floor should be polished smoothly, no pits or scratches can appear, and the corners should be ground with an angle grinder.
3, floor wax at least three times oil.
4, new maple wood floor to use 9-12 mm plywood to do the bottom lining, the bottom of the shop to be oil-proof paper can be plastic film and other objects to prevent the ground flooding.
5. Lay the composite floor first and then treat the concrete floor first, and then level or fill the large pits to ensure smooth laying.
Eight, laying carpets
1. Clean the ground nails and other garbage before laying the primer.
2, carpet interface, to the pattern and the direction of the blanket hair.
3, with the edge of the aluminum angle, can not be directly hit with a water hammer, first with a wooden block to live and then tap, so as not to cause dents.
Nine, decoration line
1. The wood trim line should be inlaid straight with no scars on the surface, and the interface should be connected by wires.
2. Put the nail head underneath the surface of the wooden thread after nailing or steam nailing, then putty
Experience lacquer decoration home improvement space cement home wallpaper function sofa bed cloth sofa bed cover toilet door floor tile function sofa exterior tile home improvement home tile adhesive tile specification kitchen tile floor tile decoration home
Amazing Magnets,Tiny Magnets ,Ceramic Magnet
East Magnet Co., Ltd. , http://www.nbferritemagnet.com