Experts advise: Seven ways to bring their own tools to inspect
How to check the house, make room, what the process is, and even what is the quality of the house. Experts advise to carry gadgets with you.
>>>House inspection procedures for housekeeping and inspection
First stroke
Look at the nuclear area of ​​the contract to see if the actual facilities are in line with the brand and quantity of the facilities and equipment specified on the sales contract, and whether there are any omissions; whether the drawing of the sales contract is consistent with the reality, whether the structure is the same as the original design plan, and whether the housing area is the same After actual measurement by the real estate department, there is a difference in the area of ​​signing the contract.
[Prompt]: To view the sales contract, if the error between the actual measurement area and the actual measurement area is within 3%, it shall not be considered. If the error exceeds 3%, the compensation agreement signed by both parties shall prevail. It is recommended that the difference between the area of ​​the house and the actual measured area be 2%, preferably not more than 5%.
The second stroke
Measure the height of the tape with tape measure [self-provided tool] 5m tape Measure the height of the building with a 5m tape measure to see if it matches the contract.
[Prompt]: It is best to keep a note on your own little book. At the same time, some data and questions of the acceptance house should be written on the paper provided by the property company.
Third stroke
Check the water to see if it is leaking. [Bring your own tool] Plastic bag, sand, and a plastic basin Check the water situation: First use the basin to hold the water, and then fill the water to the various places of water. These are the basin water, the bathtub water, the toilet water, and the kitchen. As for sanitary and balcony floor drains, basically every sink should be filled with two basins of water. The sound of squeaking should be heard, and there should be no accumulation of water on the surface. You can also open the faucet, make the water flow as large as possible, anxiously, look at the water pressure, and then try the drainage speed.
In addition, it is necessary to check specifically whether the toilet floor leaks or whether water is present. It is advisable to use plastic bags filled with sand on floor drains, and then store some water in the bathroom, shallow on the line (about 2 cm high), 24 hours later, to the corresponding lower bathroom to see if there is leakage at the top. If it is carried out at the same time as the upper occupant, it may also detect whether there is leakage at the top of the own bathroom. Check whether there is water on the bathroom floor. Use a plastic washbasin to store some water in the toilet, and then release the water to see if there is water accumulation on the floor. There should be no stagnant water on the qualified ground and the water flow should be smooth.
[Hint]: After doing this, make sure that there is no problem. We must put these prominent waters (such as basin water, bathtub water, and toilet water) in a plastic bag to cover the nozzle, and then affix it together. The water needs to be drained. Sesso, to prevent garbage from entering the building and blocking the pipeline.
4th move
Shantou tap to listen to cracks [bringing their own tools]: 1 small hammer with a small hammer gently knock on the wall, the floor decorative surface layer, used to check the house wall and the ground is empty. If you hear the voice of “emptyâ€, it means that each surface layer is in contact with the wall (ground) surface and needs to be reworked; if you hear a dull knock, it means that they are in good contact.
[Tips]: If there is any empty drums, property personnel must be repaired as soon as possible, otherwise it will be easy to break through the floor during the renovation and hinder the relationship between the neighbors.
5th move
The wall is not dripping without cracks. Examine the flatness of the wall carefully. Look at the wall for water seepage and cracks. In particular, check if there are any traces of water in the wall, such as the top surface, exterior wall, etc., if any. Be sure to find out the reason as soon as possible.
[Tips 1]: The balcony cracks are dangerous. In general, the cracks on the wall are mostly not structural cracks, and they are not dangerous. Problems with the structure of the house often appear on the balcony. If there is a crack in the connection between the room and the balcony, it is likely to be a sign of the breakage of the balcony. The relevant unit must be notified immediately.
ã€Tips 2】: If you buy the top floor, be sure to check the top surface of each house for signs of rain leakage.
ã€Tips 3】: Pay special attention if there is condensation on the walls in the winter room. There must be a problem with the insulation on the wall.
6th move
Flexible doors and windows to listen to the sound to try to open doors and windows is flexible, visual observation of the door and the door frame, the window and the window frame between the sides are parallel, close the doors and windows to hear the sound effects, but also understand their degree of sealing.
Tip: For waterproofing, the bathroom door must be set 1.5 centimeters from the ground.
7th move
Pull off the breaker to see if the breaker is completely powered off after checking the shunt to pull off the breaker. Check whether each breaker completely controls each branch line. It is best to use a multimeter to measure the flow of each strong and weak electricity.
[prompt]: Also do not forget to open the telephone, TV line interface, pull a pull, look at the firmness of the socket to see if it is fake.
Home inspection balcony doors and windows windows housing house room house decoration bathroom design bathroom waterproof bathroom door bathroom design drawing
tropedo level,High Quality tropedo level,tropedo level Details, Jinhua Hengda Tools Factory
ZHEJIANG MGS LEVEL INDUSTRY CO.,LTD , http://www.mgslevelss.com