PC sunshine board
Features
(1) Transmittance: The transmittance of PC sunlight board is up to 89%, which is comparable to glass. UV-coated panels do not produce yellowing under sunlight, and fogging, poor light transmission, light loss is only 10% after 10 years, PVC loss rate is as high as 15%-20%, and fiberglass is 12 %-20%.
(2) Anti-collision: the impact strength is 250-300 times that of ordinary glass, 30 times of acrylic glass of the same thickness, 2-20 times of tempered glass, and there are no cracks when falling 2 meters below 3kg hammer. The name of "glass" and "sound steel".
(3) UV protection: The PC board is coextruded with anti-ultraviolet (UV) coating on one side and anti-condensation treatment on the other side. It combines anti-UV, anti-fog and anti-fog functions. It blocks UV rays and protects valuable artwork and exhibits from UV damage.
(4) Light weight: The specific gravity is only half of that of glass, saving the cost of transportation, handling, installation and supporting frame.
(5) Flame retardant: The national standard GB8624-2006 confirms that the PC sunshine board is flame retardant grade B. PC board's own ignition point is 580 ° C, self-extinguishing from the fire, burning will not produce toxic gases, will not promote the spread of fire.
(6) Flexibility: It can be installed in an arched, semi-circular top and window according to the design drawing. The minimum bending radius is 175 times the thickness of the plate, and it can also be bent.
(7) Sound insulation: PC solar panels have obvious sound insulation effect, and have better acoustic insulation than glass and acrylic sheets of the same thickness. Under the same thickness conditions, the sound insulation of PC solar panels is 5-9DB higher than that of glass. . Internationally the material of choice for highway noise barriers.
(8) Energy-saving: cool in summer, heat in winter, PC solar panel has lower thermal conductivity (K value) than ordinary glass and other plastics, heat insulation effect is 7%-25% higher than equivalent glass, PC sunshine board Insulation up to 49%. Therefore, the heat loss is greatly reduced, and the building used for the heating equipment is an environmentally friendly material.
(9) Temperature adaptability: PC board does not appear cold-brittle at -40 °C, does not soften at 125 °C, and its mechanical and mechanical properties do not change significantly in harsh environments.
(10) Weather resistance: PC solar panels can maintain the stability of various physical indexes in the range of -40 ° C to 120 ° C. The artificial climate aging test was 4000 hours, the yellowing degree was 2, and the light transmittance reduction value was only 0.6%.
(11) Anti-condensation: The outdoor temperature is 0 ° C, the indoor temperature is 23 ° C, and the indoor relative humidity is less than 80%, the inner surface of the material does not condense. The dew will flow away from the surface of the board and will not drip.
(12) It is simple and convenient. It is not as bulky as traditional materials. It has been widely used in coastal cities in China in recent years.
Sunshine board use
Garden pavilions, singular decorations for leisure venues and lounges for rest places;
Interior and exterior decoration of commercial buildings, curtain walls of modern urban buildings;
Aviation transparent container, motorcycle front windshield, aircraft, train, ship, car, motorboat, submarine and glass military and police shield;
Telephone booths, advertising signs, light box advertisements, exhibition layouts;
Instruments, instruments, high and low voltage switchgear panels and military industry;
High-grade interior decoration materials such as walls, ceilings and screens;
Noise barriers for highways and urban elevated roads;
Agricultural greenhouses and breeding greenhouses;
Greenhouse greenhouse modern ecological restaurant roof;
Bicycle sheds, balcony shade canopies and roof rest pavilions in all units or communities;
Sunlight board installation method for office buildings, department stores, hotels, villas, schools, hospitals, stadiums, entertainment centers and public facilities
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Magnetic Track Light,Single Track Light,Monorail Lighting System,Mini Track Lighting
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.dilinlight.com