How to replace the ceiling integrated ceiling lamp
The integrated ceiling is a kitchen ceiling that is very popular at present. Compared with the traditional ceiling, the integrated ceiling has more advantages, saves the owner time and money, and has better appearance and decoration. The integrated ceiling is not perfect, it also has the inevitable shortcomings, that is maintenance is more troublesome, then the integrated ceiling lamp is broken? How to change the lamp for integrated ceiling ? Here's a small series here to tell you about the integrated ceiling lamp replacement method and how to purchase an integrated ceiling lamp.
How to change the lamp for integrated ceiling
In fact, in many consumers' eyes, the module replacement of the integrated ceiling is complete and simple. Take the integrated ceiling light as an example. If the integrated ceiling light (integrated ceiling lighting module) is broken and needs to be replaced, then only the power is off. Under the premise of using the suction cup to remove the module next to the lamp, and then remove the lamp light on the line, but you must remember to power off, as well as choose the size of the integrated ceiling lamp Oh.
Integrated ceiling lamp how to choose
In fact, the replacement of integrated ceiling lights is very simple, how to choose a suitable, good integrated ceiling lamp is the key, the specific selection of integrated ceiling lights are as follows:
1, installation, cleaning must be convenient
The first point in selecting an integrated ceiling light is to see if the integrated ceiling light you have selected is easy to install and disassemble. It must also be clean. This will save you a lot of time in the daily cleaning process. Even if you replace it later, it is very convenient.
2, ballast
The ballast is best to choose the electronic ballast, because the electronic ballast has the characteristics of improving the luminous efficiency and life of the lamp. At present, all fluorescent light sources on the market must have ballasts to ignite. Its role is to bring instantaneous starting voltages to the light source and stable voltages during operation. It can be seen that the quality of the ballast will directly determine this. Lamp life and light efficiency.
3, choose the color temperature not too high integrated ceiling light
The so-called color temperature is the temperature of the color of the light source. The color temperature of the integrated ceiling light of the yellow light is below 3300K, and the color temperature of the integrated ceiling light of the white light is above 5300K. Of course, there is also a difference between the two. Different lighting effects and color temperatures will ultimately lead to differences in the integrated ceiling light line. Therefore, when selecting an integrated ceiling light, be sure to look at the color temperature value. The easiest way to judge the color temperature is to place the palm of your hand close to the light source and look at the color of your palm. If it is rosy, it means the color temperature is just right.
4, choose the type of integrated ceiling lamp phosphor
At present, fluorescent lamps use more than one type of phosphor, which can be easily found. At present, the fluorescent powder used by the fluorescent lamp is the best three-color powder, because the integrated ceiling lamp using this kind of phosphor is the most energy-saving, and the light is soft, and the color rendering is high, and it is closest to the natural light color.
5, choose the lampshade of integrated ceiling lamp
The cover of the integrated ceiling lamp is recommended to choose the acrylic mask, because this kind of lamp cover is soft, light, and it has good light transmission and is not easy to be dyed. However, when selecting acrylic shades, be careful not to make the edge of the shade too thin, otherwise it will break easily. If you choose an integrated ceiling lamp with a glass shade, you should consider it carefully.
6, the overall effect of integrated ceiling lights
How do you look at the overall effect of integrated ceiling lights? It is very simple to do this, because the good integrated ceiling lamp is bright and bright, there is no dark spot after lighting, and the shade is harmonious with the whole integrated ceiling, then the overall effect is very good.
Above about how to change the integrated ceiling light and how to buy an integrated ceiling light to buy a simple introduction to here, and I hope to help you. For more information, please visit this website. Stay tuned.
Integrated ceiling
Mild steel, sometimes referred to as carbon steel or ordinary carbon steel, is defined as having a carbon content of no more than 2% and no other perceptible alloy elements.
This steel is produced on a large scale and is the largest part of the steel production industry. You will be able to find it in various applications, fasteners and fasteners.
Generally, this kind of steel has high strength, high hardness and magnetism, and is usually used in motors and electrical appliances - however, their corrosion resistance is poor, and should not be used in corrosive environment without protective coating or coating.
There are some differences between low-carbon steel and steel, because steel has lower toughness and greater brittleness, and low-carbon steel can be further strengthened by adding carbon.
If you need more information or want to order carbon steel products, such as hexagon Bolts, carriage bolts, flange bolts, U-bolts, union bolts, expansion bolts, threaded rods, please contact us.
Carbon Steel Bolts,High Carbon Steel Bolts,Bolt Carbon Steel,Carbon Steel Fasteners
Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com