Da'an 40-ton tilting press, if the rotating parts are loose, the operating device fails
Da'an 40-ton tiltable punching press has the characteristics of fast speed and high pressure, so it is necessary to use punching machine for punching and forming.
A certain safety procedure must be observed.
1. Da'an 40-ton tiltable punching machine is exposed to the transmission parts outside the press. A protective cover must be installed. It is forbidden to remove the protective cover universal milling machine : http://xichuang9.sdthsk.com/product_514_1.html
CNC milling machine : http://xichuang9.sdthsk.com/product_515_1.html
In case of driving or test drive. 25 tons punch
2. Da'an 40-ton tiltable punching machine should check whether the main fastening screws are loose before the driving, the mold has cracks, the operating mechanism, 200- ton punching machine manufacturers
Whether the automatic stop device, clutch bin brake burglary is normal, and whether the cage is clogging or lack of oil. must
If you want, you can open the empty test port.
3. Da'an 40-ton tilting punch installation mold must open the slider to the bottom dead center, the closing height must be correct, try to avoid the partial steel plate punching
Heart load; the mold must be fastened and tested under pressure.
4. Attention should be concentrated in the work of Daan 40 tons of tilting punching machine. 40 tons of tilting punching machine is strictly prohibited to carry objects such as hands and tools into the danger zone. Small pieces
Be sure to use special tools (tweezers or feeding mechanisms). When the mold is stuck in the blank, it is only allowed
Tool to get rid of the mouth
5. Da'an 40 tons of tilting punching machine found that the press is running abnormally or abnormally sounds (such as continuous hits, bursting households) should stop feeding, 50 radial drilling machine  6 3 radial drilling machine  40 radial drilling machine  3 2 Radial Drilling Machine http://yaobizuanchuang.b2b.zwls.net/
Check the reason. 40 tons of tilting punches should be stopped if the rotating parts are loose, the operating device fails, the mold is loose and defective.
repair.
Punch manufacturers http://xc.thsk.com.cn/
Hydraulic shearing machine  Http://jz.etianhe.com/
Contact: Mr. Chang Mobile: 13516370587
Fixed line: 0632-5850025 QQ number: tzjinteng
mailbox:
No. 8 , Xingteng East Road, Economic Development Zone, Tengzhou City, Shandong Province
Steel Deep Drawing Parts,Deep Drawing Fabrication Oem,Custom Factory Sheet Metal,Sheet Metal Deep Drawing Fabrication
JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.tongdetrades.com