• Posted on

How to prepare white mushroom

1. 90% cottonseed shell, 5% corn flour, 2% gypsum powder, 1% sugar, 2% quicklime.

2. 40% cottonseed hulls, 38% wood chips, 18% corn flour, 1% sugar, 1% gypsum, 2% quicklime.

3. Cotton seed shell 52%, corn cob 35%, corn flour 10%, gypsum 1%, quicklime 2%.

In the cultivation process, special attention should be paid to two points: First, the hyphae are cooked. After the completion of the white mushroom, it takes about 30 to 40 days for the hyphae to mature before entering the mushroom management. After the ripening culture time, pay attention to the water content of the medium, do not open the mouth of the bag to maintain moisture, and the later culture requires a certain amount of scattered light stimulation. The second is slow mushrooming. Therefore, after the completion of the hyphae maturity stage, it is necessary to carry out the management of the buds and mushrooms, and stimulate the bacteria bags to quickly produce mushrooms. Specifically, there are three measures: 1. Treatment of sputum; 2. Adjusting the humidity of the mushroom shed to about 85%; 3. Increasing the temperature difference of the mushroom shed at 10 degrees or more for 10 to 15 days.

Total 1 | <First <Prev 1 Next> Last> |
share to:

Biaxial Geogrids

Biaxial geogrids have been utilized in pavement construction and soil stabilization projects throughout the worldwide.Biaxial Geogrid is Strata`s innovative geogrid that is made from extruded polypropylene which provides superior stiffness, aperture stability and interlock capabilities for structural reinforcement of paved and unpaved roads.

11

Item TGSG15-15 TGSG20-20 TGSG25-25 TGSG30-30 TGSG35-35 TGSG40-40 TGSG45-45
Longgitudinal Tensile strength ≥ (KN/m) 15 20 25 30 35 40 45
Transverse Tensile strength ≥ (KN/m) 15 20 25 30 35 40 45
Longitudunal Elongation ≤ (%) 15
Transverse Elongation ≤ (%) 13
Longitudinal Tensile strength at 2% strain ≥ (KN/m) 5 7 9 10.5 30 30 30
Transverse Tensile strength at 2% strain ≥ (KN/m) 5 7 9 10.5 30 30 30
Longitudinal Tensile strength at 5% strain ≥ (KN/m) 7 14 17 21 24 28 32
Transverse Tensile strength at 5% strain ≥ (KN/m) 7 14 17 21 24 28 32
Width ≤ (m) 6


photobank (1)


Feature:

● Increase the bearing capacity of the roadbed and foundation and prolong their service life.
● Prevent road surface and foundation from sinking or flawing, keep clean and beautiful ground surface.
● Convenient construction saves time and labor, reduce mounting time and decrease maintenance expense.
● Prevent culverts from flawing.

● Enhance earth slope and prevent water loss and soil erosion.

● Decrease underlayer thickness and save manufacturing cost.

● Enhance the stability of side slope turf net patch to improve greening.
● Replace wire netting used in mine as intermediate ceiling netting.


Product Application

121

Reinforced soil engineering

Reinforced soil retaining wall, steep slope and the reinforcement and consolidation of the soft ground.

Road construction

Ground treatment, reinforcement of the bridge abutment, reinforcement of the enbankment, reinforcement of the pile-net roadbed.

122

Irrigation projects
Protection of port, approach lane, seabeach, channel, river channel, dam and other irrigation projects.

Enviromental projects
Land reclamation, prevention and controlling of the desertification, and the composite protective structure in the landfill sites of urban garbage and waste.

123

Mine engineering
Coal mines, side slope protection of opencast mines, slope protection for the dumping site of the opencast mines,reinforcement to counter dam in the large tailing ponds of the metallurgical mines.

Soil engineering
Construction of stuffing and package system of heavy soil engineering.

124

Slope protection
Slope protection in the area affected by earthquake.


Dump leaching
Ground consolidation of large dump leaching and slag site.


Company Information

Customer Feedback

Packaging & Shipping

FAQ
Q : Are you a factory or trading company?
A : We are a professional manufacturer that specialized in geomembrane, geotextile, Composite Geomembrane etc with ISO9001.
certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the
plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q : Are you the Gold and Assessed supplier on alibaba?
A : Yes. We are the gold and assessed supplier on alibaba and has got the factory report by SGS.


Plastic Geogrids,Plastic Biaxial Geogrid,Civil Engineering Geogrid,Plastic Civil Engineering Construction Grid

Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com