Home decoration notice small details can not be ignored
Home decoration considerations are issues that many owners care about. Decoration For people who have busy work every day, it is not too much time to take care of it, but decoration is obviously a major event, so it can not be taken lightly, in addition to the overall design and construction of home decoration notice, there is the problem of decoration details The details can truly reflect the success of a home improvement. Then, the next Xiaobian to introduce home decoration considerations , hoping to help the decoration owners.
1. The wall of the construction must be cleaned out of the original grassroots (except for new houses and intact paint);
2. Check the original base with 2M long ruler before squeegeeing. If the error exceeds 5MM, the original plastering layer must be destroyed and re-leveled with 1:3 cement mortar;
3, paper plaster base, with gypsum powder joints, then kraft paper or elastic self-adhesive tape, self-tapping screws on the gypsum board must use anti-rust screws;
4, the first time putty should use 1.5 ~ 2M ruler scraping, yin and yang angle must be through the ink line to find the verticality and flatness;
5, After the putty should be fully dry before the first time before construction (aluminum ruler should be used as an auxiliary tool)
6. In addition to using the ruler to check the flatness of the latex paint, the hand touch is not allowed to have a concave-convex sensation and the granule-like sensation
7, using paper tape to protect the door edge line, cabinet edge and other places with latex paint
8. Clean the dust on the wall with a feather duster before applying the primer
9, the primer brushing again, topcoat two times, after brushing the primer, adjust the putty with a paint to make up, after polishing can only be painted
10, latex paint and line switch panel and wooden cover must be tight, smooth, not missing brush brush
11, when the above paint, should be based on the actual situation, add water, evenly diluted and evenly mixed, add water up to no more than 20%, too little prone to brush marks, too much cover uneven (in strict accordance with the product specification for use)
12. If the topcoat is to be painted, it shall be painted from top to bottom, first horizontally and then horizontally and evenly brushed, and finally combing the brush mark vertically (usually by spraying).
13. The paint spraying and brush shall not have obvious brush marks, no runny phenomenon shall occur, and brushing shall be applied. Always top-down, after the ceiling, the same area shall be completed continuously.
14. During the painting process, it is necessary to pause, and the brush or roller must be submerged in the paint or water. After brushing, all utensils should be washed with clean water immediately.
15, the second time the paint should be carried out after the paint is completely dry on the top, at least two hours apart
16, latex paint construction room temperature should be above 5 degrees, while the closed doors and windows to reduce air circulation, brushing two hours before opening the window ventilation
17, after the construction of latex paint, should pay attention to product protection, shall not be scratched, especially light and mercerized latex paint should pay attention to, because there is light and mercerized latex paint brush after the prone to "flower" phenomenon.
Editor's summary: The home decoration notices are introduced here and I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
home renovation
3 Way Ball Valve,Sanitary Clamp Ball Valve,Three Way Ball Valves,Stainless Steel Tri Clamp Ball Valve
WENZHOU FOREVER CLASSIC TECHNOLOGY CO.,LTD , https://www.fosicvalve.com