Floor heating machine advantage warm cleaning machine working principle

The floor heating cleaner is also called a geothermal cleaner and is mainly used for cleaning geothermal pipes. The automatic pulse geothermal cleaning machine utilizes gas, water, and electromagnetic pulse combination to convert the internal vortex power into kinetic energy to perform high-speed motion in the form of tiny molecules, through the thermal energy, kinetic energy, and electromagnetic pulses in the course of operation. Decompose the dirt in the pipe wall and flush it out of the pipe together with the water molecules to achieve the effect of cleaning the floor. Here to tell us about the advantages of warm cleaners and cleaning machine to warm it works.

Warm cleaning machine advantages

1: The appearance design has already obtained the national patent; The design concept of the practical + fashionable is in the domestic geothermal cleaning machine to take the lead;

2: Do not solve the tube, the connection pipe and the water separator can be connected for cleaning;

3: Without any chemicals and chemicals, there will be no corrosion to the inner wall of the pipeline and system components. The emissions will not cause pollution to the surrounding environment.

4: No blockage, suitable for all types of complex piping system cleaning.

5: Small and light, easy to operate and wash quickly.

6: The cleaning inspection method is simple and the observation method is adopted. Can observe the effect of cleaning sewage, but also can be compared before and after cleaning.

7: This equipment can not only clean the geothermal pipes, but also clean radiators, heat sinks, household water pipes, domestic water heaters and ground heat pipe systems.

Floor cleaning machine works

The compressed air and water provided by the air compressor are input into a fully automatic pulse generator. The pulse generator is controlled by an automatic pulse controller, and physical pulse waves of different frequencies and wavelengths are emitted according to the need of cleaning. The computer integrated circuit board will The reference data is intelligently matched and reflected to various instruments on the machine panel. High-pressure water jets and airflow shocks and wave vibrations are performed on the inner wall of the cleaning pipeline. The rust of the tube wall and the deposits in the tube are peeled off layer by layer and passed through the end of the tube. With the rapid discharge of water out of the pipe, the work is repeated until the purpose of cleaning is reached.

Cleaning process

(a) Connection

1. Close the water separator water return valve and the return valve.

2. Connect the pulse introduction tube and connect the digital computer pulse generator with the header of the water separator total water supply plug;

3. Connect the water pipe and connect the water source with the computer pulse generator;

4. Connect the air pipe and connect the air compressor and computer pulse generator;

5. Connect the drain pipe. Connect one end of the return manifold to the header of the return header, and add one end to the drain.

(II) Startup and cleaning

1. Connect the air compressor and digital computer pulse generator power supply, press the power switch on the pulse generator, start the compressor to work to the rated pressure 8Mpa;

2. Open the compressor gas switch and system water supply valve;

3. Open a separate valve on the water separator, close the other partition valves, wash one open and one root, and clean;

4. After seeing the backwater at the drain end, the operation controller controls the digital computer pulse generator to send the physical pulse wave into the geothermal circuit to start cleaning. According to the length of the geothermal pipe, the installation time and the state of fouling, the frequency of pulse cleaning can be adjusted and cleaned. Until clean.

Summary: The relevant information about the advantages of floor heating and cleaning machines and the working principle of underfloor heating cleaners are introduced here for everyone. I hope this article will help everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.

Warm

Flood Light

Flood Light,Battery Flood Light,Stage Flood Light,Led Flood Light

EV LIGHT Guangzhou Co., Ltd , https://www.evlightpro.com