Epoxy anti-static floor features how to maintain
Generally, we can see the epoxy anti-static floor in the occasions where the requirements of anti-static are highly demanded for the electronics, microelectronics industry that are highly clean, beautiful, dust-free, and aseptic. Then we will learn more about the ring together with everyone. Oxygen antistatic floor knowledge.
Epoxy antistatic floor paint
Epoxy anti-static floor paint is composed of high-grade epoxy resin, high-efficiency conductive material, advanced pigment additives, and a two-component product with a specific ratio of epoxy-specific curing agent. It is subdivided into common coating anti-static floor paint. And anti-static self-leveling floor paint. For the special requirements of precision electronics, precision instruments, precision instruments and other production sites, the use of epoxy resin anti-static floor construction can effectively reduce the repair rate and loss of finished products of precision electronic products, and reduce the carrying of low-voltage static electricity in the production process. Electronic product hazards.
What are the characteristics of epoxy anti-static floor?
1, can quickly leak static charge
2, anti-static excellent long-term, free from time, temperature, humidity and other effects
3, strong adhesion, excellent wear resistance
4, resistant to oil, general chemical corrosion resistance
5, dust, moisture, smooth
6, floor thickness of about 0.3mm
Epoxy anti-static floor how to maintain
1. After the construction of the pedestal, it needs to be maintained for 7-10 days before it can be put into use. During the period of maintenance, water or other solution should not be allowed to infiltrate the surface.
2. All employees who enter the workshop must be replaced with rubber-soled shoes (not wearing black shoes with foam bottom) (so as not to scratch the ground when the outside mud is brought into the workshop)
3, all hardware: such as iron chairs, iron tables, iron shelves, etc., their feet should be wrapped with soft plastic, rubber or paper pad to avoid scratching the ground during use
4, the tractor pulls must fully lift the board off the ground, please pay special attention to the corner of the board when turning, do not scratch the ground
5. When cleaning the floor, please use a soft mop with good water absorption or a wet or dry vacuum cleaner, which can be cleaned with water or detergent, but please note that the floor is slippery
6, if the use of a long time due to wear or scratch, small area can be repaired, if the area is larger, it is recommended to re-roll once
7. Before the equipment enters the factory, lay a hard carton bottom on the floor to avoid scratching the ground during transportation.
8, carts, cart wheels please use hard or elastic rubber wheel, and plant inside and outside use separately
9, can be based on the requirements of the ground to do waxing (the effect of preventing scratches on the ground)
Epoxy anti-static floor application range
Epoxy anti-static floor paint is suitable for telecommunications, electronics, microelectronics, computers, precision instruments, textiles, printing, powder, chemicals, organic solvents, gas and all other antistatic factories, floors and storage tanks.
Summary: The above is the knowledge of epoxy anti-static flooring that Xiaobian will share with you. I hope to help everyone. More exciting content is on the website information platform.
How to Avoid Decoration Contract Pitfalls
Metallurgical Equipment,Metallurgical Supplies,Metallurgy Lab Equipment,Metallurgical Testing Equipment
Taiyaun JDS Machinery And Equipment Co., Ltd. , https://www.ccagoods.com