Electric hanging basket construction plan installation notes detailed
[Electric basket installation precautions]
First, check whether the safety movement of the electric basket is flexible. When the pulley is pulled, it should be light and fast, and there should be no jamming.
Second, check the electric basket hoist, press the electric button, so that the hoist idling, see if the operation is normal, no noise and jamming phenomenon.
Third, the electric safety rope safety rope into the safety lock, and put the weight hammer hanging. Start the hoist motor and thread the wire rope into the hoist. The rope head should come out of the rope outlet automatically.
Four, electric basket equipment must be read before the installation of the product specification, and operators to conduct training, so that operators understand the working principle of the equipment, precautions and safety procedures, not training without training.
5. Assemble the hanging basket according to the electric hanging basket illustration. Counterweight iron should be adequately weighted. The weight of the counterweight should be three times the torque of the electric basket (force x arm = torque). The joints should be firm and reliable.
6. The distance between the lifting rope and the safety lock should be adjusted after the electric basket is assembled. By moving the safety lock, the basket tilts 6° to 8°, and the safety lock can lock the safety rope.
[ Electric basket construction notes]
1. Putting a Good Solution Close As we all know, the construction plan is a prerequisite for the smooth construction and it is indispensable. In the plan, there should be equipment selection, installation precautions, operation precautions, and demolition precautions. There must also be detailed configuration arrangements. And there are relevant departments for approval. To grasp the pertinence and feasibility of the scheme, we must not discuss it in a general way. According to the characteristics of the project to carry out matching baskets, that can meet the construction requirements, but also to ensure safety, as far as possible so that baskets cover the entire operation surface, leaving no dead ends. According to statistics, some accidents are caused by the unreasonable configuration of the basket. Workers want to work but are not able to reach the limit. They have to take the scaffolding board on the basket to achieve a higher construction height or swing, resulting in accidents. In short, carefully concentrating good projects is the guarantee for accomplishing tasks accurately, efficiently, and safely.
2. Control the entry of the equipment The equipment entering the site must be consistent with the plan, and various accessories are complete and effective. We must also strictly examine the material arrival list, carefully count the points and compare them one by one. We can neither mix and match different types of hanging baskets, nor can we use small baskets to be large and shoddy.
3. Under normal circumstances, the basket is entered into the construction site in the form of loose parts. It should be monitored in detail whether each basket is correctly assembled and installed according to the plan. It is necessary to assemble firmly, complete and complete components, and place it in a safe and reliable place.
4. The acceptance of the installed baskets must be checked. After the baskets are installed, the basket manufacturers, on-site technical personnel, production personnel and on-machine operators must be organized for joint acceptance. Focus on the control of the installation position of the basket, the structure of the assembly, weight, safety ropes, safety locks, electrical equipment, flexible and intact, the basket up and down operation should not have obstacles. Acceptance must be 100%; when the quantity is large, it can be checked and accepted in stages, and a written procedure can be established. Unauthorized baskets are prohibited from use. The problems existing in the acceptance must be rectified within a certain period of time. After confirming that there are no problems, they should be put into use.
Xiao Bian concludes: The above introduced the construction scheme of the electric hanging basket and hoped to help everyone. For more relevant knowledge, please continue to pay attention to this website information platform. Follow-up will present more exciting content for everyone.
Electric wrench electric blinds electric opening and closing curtains indoor hanging basket electric sliding door price
An electric Gate Valve is a type of valve that uses an Electric Actuator to open and close the gate of the valve. The gate is a flat or wedge-shaped piece that moves perpendicular to the flow of the fluid. When the valve is open, the gate is lifted or pushed aside to allow the fluid to pass through. When the valve is closed, the gate is lowered or pressed against the valve seat to prevent the fluid from flowing.
Electric gate valves are commonly used in industrial applications where precise control of the fluid flow is required. They are often used in pipelines, water treatment plants, oil and gas refineries, and chemical processing plants. The electric actuator allows for remote control of the valve, which can be operated from a control room or a computerized system. This makes it easier to monitor and adjust the flow of the fluid, which can improve efficiency and reduce the risk of leaks or spills.
Electric Gate Valve,electric actuated gate valve,electric actuator for gate valve,motorised gate valve Description
WUXI KVC-VALVE , https://www.wxkaiweixi.com