Don't be fooled! 7 details teach you to identify the merits of ceramic tiles
Tiles are one of the building materials that we often use in our daily home improvement. Many people choose to use ceramic tiles to decorate their kitchens, bathrooms, living rooms, and aisles. However, in the face of tile products with little difference in appearance on the market, many people often feel that they cannot start. Below, Xiao Bian introduced seven practical skills for you to identify the advantages and disadvantages of ceramic tiles. I hope that I can help you to buy a suitable tile.
1, look at the surface
Mainly to see whether there are black spots on the surface of the tile, bubbles, pinholes, cracks, with or without scratches, stains, missing edges, missing corner tiles also pay attention to whether there is leakage, leakage grinding and other defects. Check the bottom embryo trademark mark, the regular manufacturer's product bottom embryo has a clear product trademark mark, if not or is particularly vague, it is recommended carefully selected!
It also depends on whether the surface of the brick surface is flat or not. Bringing together two tiles on the front side, if you can see the light in the middle, the brick surface is not smooth and bumpy, and it is flat tiles that fit together perfectly. Then turn around to see if the corners are still consistent.
Listen to the sound
By tapping on the tiles, you can identify the quality of the tiles by listening to the sound. Here are two aspects of the kitchen and floor tiles and glass tiles:
Tap method:
1) Wall tiles or small-size tiles are generally separated by one hand with five fingers, hold the tiles, and tap the tile face with the other hand. If the emitted sound is metallic, the quality of the tiles is better.
2) Floor tiles (bathroom tiles or antique tiles used in the living room and other floors). Use one hand to raise the tile side and tap the middle of the tile with the palm of the other hand. If the sound is thick and the echo is long. If the sound of copper bells is struck, ceramic tiles have a high degree of porcelainity, strong wear resistance, high flexural strength, low water absorption, and are less susceptible to contamination. If the sound is turbid and there is no echo, the ceramicity is low (even exists Cracks) The calcined body of the tile is not fully calcined, the wear resistance is poor, the flexural strength is low, and the water absorption rate is also higher. Such a vitrified tile is extremely susceptible to contamination.
3, measure the size
The standard size of a tile is clearly defined. If the result obtained after the measurement of the brick body is different from the value indicated by the product, it means that the product is a poor quality product. The one-by-one inspection of size specifications, with a size error greater than 0.5 mm and a flatness greater than 0.1 mm, will not only increase the difficulty of construction, but will also greatly reduce the effect of the renovation.
More exciting content recommended
What kind of bathroom tiles pick? Five minutes to teach you to figure out the tile category
Electric steamer VS microwave oven who is a real home helper?
Dress up beauty and ultimately "he" wall paint purchase guide
Create natural art Fan 6 Nordic IKEA furniture recommended
Love Mediterranean pure Mediterranean style furniture recommended
Tile Tiles Buy Tile Brands
Polishing Wheel, Large Polish Wheel,cotton Shield,copper Polishing,metal Polishing
polishing wheel, large polish wheel,copper polishing,metal polishing,cotton wheel
NINGBO HENGHUA METAL SURFACE TREATMENT TECHNOLOGY CO.,LTD. , https://www.henghuametal.com