Color Art Floor Construction Process Color Art Floor Features
The color art floor, also known as the art floor, is a floor that is colored with colored powder scattered on the surface of the initial set cement, and then stained with acid colorants. The raw material of the color art floor is a high-molecular polymer, and it is a new type of high-tech color flooring material. It can be used on the surface of concrete to produce rich and colorful decorative surfaces with high strength and high wear resistance. The wall and the old ground are decorated and transformed to truly simulate the patterns of various wall tiles, tiles, stones, slate, and floor tiles in traditional building materials.
Color art floor
The color art floor, also known as the art floor, is a floor that is colored with colored powder scattered on the surface of the initial set cement, and then stained with acid colorants. The colored art floor is made of special hard-wearing minerals and colored floor hardeners synthesized from pure natural inorganic pigments and polymer additives. Through the die-casting, finishing and sealing processes, the concrete surface produces extraordinary stone textures. Rich color effect.
First, the construction process of colored art floors.
1. Check the quality of the concrete foundation layer: Start construction in full compliance with the technical requirements.
2.ç ¼ Surface Lapping Treatment: Add 1cm thickness of C25 cement mortar on the newly poured concrete surface.
3. Select mold: Select color material and pattern mold according to customer's requirements.
4. Sprinkle hardening material: The prescribed amount of 2/3 hardener is evenly spread on the concrete surface of the initial setting stage, and the general dose is 4 kg/m2. After the hardening agent is wetted and moistened, it is leveled and calendered with a hand-held iron plate, and the ground is reground for a certain period of time. A second 1/3 material spreading and calendering operation is performed.
5. Leveling light: Check the quality of the polished surface, check for cracks, bubbles, slag, color uniformity, according to the light leveling operation of the concrete, light collection operations are intertwined.
6. Sprinkle release powder: In the hardening material at a certain stage of condensation, the surface is dry without any obvious moisture, evenly spread a layer of release powder matching with the hardening material.
7. Pressing the pattern with the mold: The surface of the pattern is selected by the selected pattern template. When pressing, the force should be uniform, the mold should be kept fixed, and the pressing pattern must be formed once, and the pressure cannot be heavy.
8. Rest: Trim the hair and trim locally.
9. Dry, maintenance (days are 2-3 days, rain is set).
10. Use a high pressure water gun within 100 pounds to spray wash the surface.
11. After thoroughly checking the water, apply a protective polish.
Second, the characteristics of color art floors:
1. The appearance is natural, real, three-dimensional, and various shapes;
2. Wide range of use, can realistically simulate the patterns of stone, slate, wood grain, wall, floor tiles etc. in traditional building materials;
3. Strong impact resistance, strong corrosion resistance, high compressive strength, compressive strength up to 90MP;
4. Non-toxic formula, green products, in line with environmental requirements;
5. The outer layer has a non-slip function;
6. Economical, durable, long-lasting and reliable, its life span far exceeds the general cement concrete floor decoration materials, the appearance quality and the use performance are superior.
The advantages of color art flooring
1. Rich patterns, multiple combinations, realistic effects, highlighting individuality;
Second, colorful, nostalgic or classical, romantic or modern, three-dimensional emerge;
3. The on-site color stamper floor texture is integrated with the grass-roots level, which solves the easily-cracked phenomenon caused by the looseness and hollowness of the surface layer that is difficult to overcome in the conventional pavement.
4. The surface of the die floor is flat and the texture of the natural stone is preserved, and the difficulty in paving the natural stone due to uneven thickness is avoided.
5. The reinforcing material for the color stamping floor is a composite material made up of specific metal and non-metal aggregates and excellent polymers according to the scientific ratio. The wear resistance ratio of the authority is as high as 450%, and the wear resistance is long;
6. The soluble concrete sealant of the surface color mold floor has the advantages of acid and alkali resistance, non-pollution and easy cleaning;
7. Color stamping floor uses inorganic colorant and UV-resistant soluble base concrete sealant to interact with each other. The color is stable. Waterproof and anti-mildew, not afraid of chemical corrosion, adapting to sudden changes in temperature, without frequent maintenance, if necessary, once painted. The color concrete floor sealant and the concrete-based concrete sealant are as bright as new;
Summary: The relevant information on the construction procedures of colored art floors and the characteristics of colored art floors was introduced here. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Construction installation decoration construction knowledge construction delivery construction contract
Yantai Ciso Lubrication Technology Co.,LTD , https://www.cisolubrication.com