Bathroom decoration knowledge
Bathrooms are places where people wash away and are tired of work. So now people are paying more and more attention to the decoration and layout of bathrooms. In order to obtain a comfortable bathing space, people often completely renovated the original bathroom.
In addition to the use of superior bathroom equipment, the remodeling of the bathroom should be the focus of other relevant floor tiles, ceilings, and bathroom doors. However, in addition to these “hardware†devices, design and construction are indispensable elements in the renovation of the bathroom. With state-of-the-art equipment, coupled with meticulous design and construction, the refurbished bathroom space will present a new atmosphere, making you more comfortable to use.
There are many points to pay attention to in the renovation of the bathroom, such as the choice of various decorative materials, color matching, space configuration, as well as construction details, etc., will affect the success or failure of the bathroom renovation.
>>> Links: 3 Ways to Stay Warm in Winter Bathrooms
First, the threshold: the threshold is to prevent the overflow of water from the bathroom level, its design and construction of two points: First, the upper plane of the door to the bathroom to tilt inside, so that the water can slide smoothly to the bathroom inside; The threshold is the same as the width of the door frame (and the thickness of the door frame must be the same as the thickness of the wall), so that there will be no large access when laying the floor tiles, and the chance of creating a breach will be relatively reduced.
Second, the ground waterproof: there are many kinds of waterproof materials, the current use is more common waterproof agent. When laying a waterproof layer, it should be spread to about twenty centimeters above the foot of the wall, and at least not lower than the height of the threshold. When there is a reserved pipe on the floor, the waterproof layer needs to wrap the reserved pipe. After the waterproofing of the floor is done and dried, it must be immediately primed with cement mortar or protective measures to prevent damage to the waterproof layer.
3. Laying of floor tiles: There are three essentials for paving slabs: First, there must be about 1 percent of the discharge slope, and the slopes should face the floor drains; secondly, the floor tiles should have the same thickness and be aligned with the wall tiles. Third, when the bathtub front wall is made of brick tiles, it is best to place the tiles on the bottom of the wall first, and then stick them to the wall to avoid breakage.
4. Washing the countertops: Washing the countertops should be done with a “full body†(that is, the surface material of the countertops is the same as the internal material composition and color), and the countertops with only one surface of the plastic case should not be selected because only the surface of the surface of the plastic case will be damaged. Not possible to fix. (To test whether the countertop is "fullbody", you can use the light to illuminate from the back of the room. Light-transmissible is the "full-body" countertop). In addition, joints must be applied to the joints between the tabletop and the washbasin to prevent the water from oozing from the joints.
Fifth, the toilet: generally installed in the toilet, used to cement the mortar to fix the toilet, in fact, this method is wrong, this way to fix the toilet, the toilet can not be disassembled, if you encounter severe pipeline obstruction Only one way to knock off the toilet.
Exhaust fans: Generally, when people build houses, they do not pay much attention to bathroom ventilation equipment. Most of them only install an exhaust fan. The bad gas in the bathroom cannot be discharged outside and still just circulates in the bathroom.
Bathroom Bathroom Toilet Space Cement Interior Decoration Floor Tiles
Jinbaocheng Steel Pipe Manufacturing Co., Ltd , http://www.lc-steelpipes.com