ISG, IRG, GRG, IHG, YG, TEB series of single-suction single-pipe vertical pipeline centrifugal pump, using IS pump performance parameters, hydraulic model. Pump one, out of the same diameter and at the same level, the shaft seal with a mechanical seal. TEB is the latest product developed by our factory due to the restriction of space and lifting equipment due to user's maintenance of pump. 1, ISG-type pipeline pump for heating and air conditioning systems, hot and cold water circulation, high-rise building water supply, fire pipeline pressurization, long distance water delivery, industrial production process of circulating pressure, garden sprinkler, the media is clear water or physical, chemical properties similar Other media in water. Medium temperature does not exceed 80 ℃. 2, IRG-type hot water pipeline centrifugal pump is mainly used for hot and cold water circulation in the greenhouse, boiler, bathroom, non-corrosive hot water pressurization cycle in various industries. Medium temperature does not exceed 150 ℃. 3, GRG-type high-temperature pipeline centrifugal pump is mainly used for boiler water supply and drainage cycles, hot and cold water circulation, heating and other industries without corrosive high temperature liquid. Medium temperature does not exceed 200 ℃. 4, IHG chemical pipeline centrifugal pump is mainly used for chemical industry, environmental protection, equipment brewing, pharmaceutical, papermaking, textile and other industries booster, chemical delivery of corrosive liquids. Medium temperature does not exceed 100 ℃ 5, YG pipe pump for the transportation of solid particles, viscosity less than 120 centistar non-corrosive oils and petroleum products. Transmission medium temperature is -20 ~ 80 ℃. 6, TEB for demolished vertical pipe pump, change the material can be applied to a variety of working conditions above. Performance Range Flow: 5.6 ~ 720m3 / h Head: 5 ~ 125m Maximum working pressure: 1.6MPa (200 and below), 1.0MPa (200 and above) Import pressure ≤ 0.3MPa (more than 0.3MPa when ordering should be specified) Import and export of ISG, IRG, GRG, IHG, YG and TEB series pipe pumps are the same in size and in the same horizontal direction with each other at 180 ℃. Pumps are the main components of the pump body, pump cover, impeller, seal ring, motor bracket, pump and motor coaxial (TEB-type independent pump shaft) seal with high-quality mechanical seal. From the motor end, the pump rotates clockwise.
Cell Culture
Petri Dishes (Stackable & Slippable)
Manufactured from medical-grade virgin polystyrene
Ventilation ribs reduce condensation and allow air circulation
Consistent flatness allows for even media distribution
Flared lid skirt and squared corners for easy one-hand operation, especially with gloves
Stackable Petri Dishes
Recommended for standard microbiology or general laboratory use
Stackable lid design for increased stability
Available in two sizes: 60mm x 15mm and 100mm x 15mm
Automation Petri Dishes (Slippable)
Designed for automated filling and streaking systems
Side Arrows and ISO Mark Target for automation
Available in 100mm x 15mm size
Petri Dishes (Slideable)
Features a partial edge ring on base which allows a single dish to be slid from a large stack and enhances stability when stacked
Petri Dishes (Non-treated Cell Culture Dishes)
Stronger, heavier construction
Surface is hydrophobic and does not facilitate cell attachment
Available in four diameters: 35, 60, 100 and 150mm
150mm x 15mm Petri Dish now available
35mm dish has off-set bottom for improved handling
60 & 100mm dish features a grip ring on the base
Lids contain molded spacers for gas exchange
Stackable lid design for increased stability
Packaged sterile (gamma irradiated)
Cell Dish,Inoculating Loops,Culture Plate,Pasteur Pipette,Cell Culture Dish
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedicals.com
