What should be noticed when installing Xiananmen or floor?
The decoration must be done in accordance with the order, so that it will not affect the progress behind, but will not be broken into the decoration effect, so that the decoration process before the renovation must be mastered. The following Xiao Bian will tell you about what you should pay attention to when you use the Xian'anmen or the floor and install the floor.
Xian'anmen or the floor is good
In the process of installing at home, the first door or the floor is good. Generally speaking, it is first to install the floor and then install the door. Here's why:
1, first install the floor and then install the door This practice is to allow the gap between the door and the floor to be installed will not appear the size. If you install the door and then install the floor there may be this problem, although at the time of installation, some of the masters may first reserve the size by telling the thickness of the floor in advance, but this approach will also appear some errors, if If the door gap is large, it will look too ugly. At the same time, it will have poor sound insulation and small door gaps. This may cause the door to rub against the floor, which will crack the floor.
2, first install the floor and then install the door This method can also avoid the floor and the door frame between the various special angles and sizes of installation difficulties occur, if you are the first door after installing the floor this time there may be floor and door frame It is difficult to combine.
3, first install the floor this approach can also ensure that you install the door frame can be pressed on the floor, so that the gap between the door frame and the floor is also more appropriate, the overall effect seems to be better.
When installing the floor should pay attention to what
1. It is recommended that you clean the places where you want to hit the keel in advance of paving the floor. If you have time, it is best to install yourself on the first day of flooring. You can clean it.
2. When paving the floor, workers must not waste the floor, and some places can help you use the corners. Although it would be a waste of time for workers to do so, but to know that a square floor of the price is also very high, so as to waste materials, not only you have to spend more, but also more installation fees, while the decoration is not improved.
3, paving the floor must be allowed to install the master on the good board seams. For example, when your home is in the shop, you can consider adding a metal gusset to the middle of the living room floor. However, some masters find it too cumbersome to save this step, because doing so is more troublesome at construction and requires one more side.
4, saw the plate must pay special attention to this point, can only allow the master to saw in the tiled venues (above, but also covered with cardboard), like a paved wooden floor must not be a beggar. This protects the wooden floor and it is not so clean.
Summary: Regarding the Xiananmen or the floor is good and when installing the floor should pay attention to what the relevant content is introduced to this, the installation process must be in accordance with the order, in order to be able to put out the effect will be more perfect, while at the shop floor some details are also Pay attention to it and hope that the above introduction will help you.
Nm400 Wear Resistant Steel Sheet,High Wear-Resistant Steel Plate,Wear-Resistant Steel Plate,Nm Steel Plate
Shandong Yiyuantong International Trade Co., Ltd. , https://www.yyttrade.com