Toilet is not water how to do
If toilets are used for a long time, they will encounter such or similar problems. For example, there are many problems such as toilet leaks, toilets plugging, and toilets failing to get water . As an essential daily life tool, we must not let it go. Today, Xiao Bian has come to share with you the question of whether the toilet is not watered . How should we solve it?
How to do a toilet without water?
My home's toilet tank was difficult to get into the water recently and it took ten minutes to complete. It was very noisy. If family members go to the toilet two times in succession, they must wait for it. Although I don't think it's a big problem and it's not worth looking for someone to fix it, it's still quite annoying. I recently researched online information and found it for a long time before I found a solution based on individual schematics and other people's tips.
1. In fact, it is also simple, and the fact that the faucet has little water is a problem. There is also a filter inside the toilet replenishment device which is a little better. The filter screen is blocked by too much scale for a long time so that the tap water cannot enter. Just remove the filter and clean it.
2. Close the valve on the hose connected to the water tank, and spray it with water for a while. Wash the toilet again and drain the remaining water from the tank water.
3, along the inlet hose, look under the toilet, there is a hex nut to the hose and water tank in the hydrant (an upright plastic tube) together, with a wrench to turn the nut, and then just along Looking up the position of the nut, there may be a same position as the nut, the same rotation, the same function of the risk, but also unscrewed, my family's this is plastic, I do not know anything else like this does not. After two processes, the hydrant can be taken out of the toilet.
4, remove the water replenishment, look inside the tube there is a small square column, with a needle nose pliers pull out, you can see the square column and the filter is one, together out.
5, use a waste toothbrush and the like, clean the filter. It is better to have a scale cleaner. No problem is not a problem. I just use a descaler to add water to the filter for a while. It's particularly clean. I can also fill the mixture with some water in the replenishment device. Scale removed. All clean.
6, the last as-is installed back on it.
How to do toilet water is not how to do two methods:
1. You must make sure there is tap water, and turn the tap switch on the angle valve.
2, according to the water tank lid to open, you can see the inside of the tank accessories, toilet tank accessories are generally divided into three parts, the first is the drain valve, just below the lid button, the second is the inlet valve, This is the one where the hose is connected outside the toilet bowl. Next to the drain valve is the third button.
3, after seeing the lid of the toilet cover, will it reach the inlet valve? If so, just adjust the position of the inlet valve. Then look at the inlet valve float or float will not move up and down freely? This is the key, because if the card is stuck, the water will not enter. The general float bucket is equipped with an adjustable cross eye, and the height of the float bucket can be adjusted. When you rotate it in the direction of the clock, the problem should be solved.
Toilets do not water how to do other methods:
1. It should be something that has an inverted cup like it stuck.
2. Open the lid with the button, there is a float inside, and you see if it is stuck.
3, open the toilet lid to check the water tank when the water ball is not sinking to the bottom, if there is no water at the top, indicating that the float is broken, can not sink leading to the water inlet is always closed, so no water, also You can check the other reasons, whether the triangle valve is in the open state, remove the triangle, check whether the connection with the inner wire in the wall is blocked by the raw material, whether the open triangle valve plug opens and closes, and whether the water is soft. Whether the tube is unobstructed or not, then something else can be excluded. If all of them are normal, then you should consider the problem of the water pipe and whether the welding is blocked during construction.
Edit summary:
The above is a brief introduction to how to do the toilet without water , and I hope to help you. There are still many ways to solve the slow water on the toilet tank. The three strokes mentioned above to the friends are very helpful. The slow flow of the Sheung Shui is a small problem in life. It can be resolved through its own strength. You can experience your own hands-on fun in the process of repairing, and learning more about life tips can add fun to life. For more information, please visit this website. Stay tuned.
Toilets
Sensor including infared sensor, INfared transmit and water sensor.The infrared sensor use for bathroom, the light will turn on automatically when people come.INfared transmit work with split air conditioner.Water sensor use for the Background Music System in bathroom, the music start while open water,it is installed on the hot water valve.
Infared sensor
INfared transmit
Water sensor
Motion Sensor,Infrared Motion Sensor Smart Switch,Pir Motion Sensor,Infrared Motion Sensor
Shenzhen Zhuohao Intelligent Electronic Development Co., Ltd. , https://www.szactop-smart.com