The specific steps of pure wool carpet cleaning
The following is a brief introduction to the method of cleaning pure wool carpets, so that everyone has a certain understanding and understanding of the cleaning methods of pure wool carpets.
The cleaning agent used for cleaning should be foamy.
The tool is generally a brush for brushing the carpet, a scrubber for the bubbler, a combing device, and a vacuum cleaner for vacuuming.
After doing the above preparations, it is necessary to carry out the operation on the ground. The specific steps of the operation are as follows:
1. Make a comprehensive cleaning of the ground with a machine that has been prepared to absorb dust.
2, if you find that the carpet is covered with some difficult to clean, such as oil, juice water, etc., then it must be specially cleaned before entering the next process.
3. Combine with water and detergent, dilute, then dilute the liquid into the cleaning machine, then install it on the cleaning machine and clean the entire carpet with a carpet brush. For the edge of the carpet, handle it with a hand brush.
4. Repeat the above actions.
5. The role of the carpet comb is to dry the carpet. Therefore, to choose a good carpet comb, the carpet can be dried as soon as possible.
6. Finally, use a vacuum cleaner to remove the cleaned foam.
This completes the whole process, but when cleaning, for the pure wool carpet, we must pay attention to the protection, do not wrinkle the carpet during the cleaning process.
For the measuring requirement of some industry, Wintape offers long surveyor steel tape measure and the product is available for more length versions. The built-in strong spring enables smooth extension and retraction. The low glare blade makes the number reading clear and it bears measuring units in meters. The stainless steel tape has passed ROHS,En-71 and 6P environmental test. It is green and non-toxic.
Long tape measure can satisfy long distance measuring and industrial measuring. We adopts vinyl coated fiberglass tape, for it is non-stretch and waterproof, which makes it workable in wet condition. The high flexibility of the tape has endowed high accuracy and durability of the product for long time use. ABS plastic case is to protects the retracting spring system and the whole construction. The case can be customized on the color and logo printed as well.
About Material
The tape measure is made of ABS case, PVC coated fiberglass. All the materials are eco-friendly, which pass ROHS and EN-71 tests. The lead content is less than 5ppm.
About Case Color
Standard colors are yellow and blue, yellow styles are in round shape, blue style is in crossing shape.
Other colors can be customized according to pantone code.
About Custom Logo
Custom logo is available.For 1-2colors logo, we will use silk printing
For full color logo, we will print it with heat transfer printing ,
And we also make normal sticker for single color or full color logo
About Tape Colors
Standard tape colors are in white and black.
About Tapeline Size and Measurement
The standard length is 10m/33ft, 30m/99ft, 50m/165ft and100m/328ft
Tape width is 13mm.
Scale Measurement is cm on one side, inch on the other side
100 M Measuring Tapes,Measuring Instruments,Fiberglass Measuring Tapes
Wintape Measuring Tape Company , https://www.wintapetapemeasure.com