Squatting pan structure profile analysis What is the installation step of the toilet?
The squatting pan is designed using the characteristics of a squat, and the squatting pan is now divided into two types: squat and unblocked. In addition, the structure of the squat toilet is divided into: return trap and no return trap, the principle of its trap is a horizontal "S" type elbow. Then, let's take a look at the analysis of the structural profile of the squat toilet and how to install the squat toilet.
First, the squat toilet structure sectional view analysis
We know that there are two kinds of squat toilets, shelters and shelters. The construction also divides the return and return traps. And there is the working principle of the water traps. It is through the transverse "S" type elbow, resulting in a " "Water seal" to prevent the odor of the sewer. From this point of view, the focus is on the trap models and installation techniques.
If the horizontal trunk is much lower than the ground, it is recommended to use the P-shaped trap; if the short tube is between the squat trap and the trap, the S-shaped trap is recommended. Although there is no use for solids, it is particularly stringent for renovations. Therefore, before installation, you must first understand the analysis of the profile of the squatting pan. This will help you to install correctly and avoid some problems in your life.
Second, how to choose a better squat toilet
1, first look at the product installation of the sewage outlet, with the wall surface reserved for the location of the sewer pipeline space is appropriate, and determine the distance from the entrance of the sewage pipeline from the ground level.
2. Compare the pit depth of the reserved squatting pan to see if it is greater than its height.
3. Try to glue the stopper into the water inlet hole of the squatting pan. Apply a layer of glass glue or putty to the outside edge of the squat toilet inlet hole, and then insert the inlet pipe into the rubber inlet hole. Make it seal well with the rubber plug to prevent water leakage.
4. After fixing, apply a layer of glass glue or putty on the edge of the water outlet of the squatting pan, and then screw the sewer pipe into the inlet, and use the coke residue or other filler to set the toilet level.
5, the installation is complete, start the test. Turn on the water first to see if there is any water leakage at each joint. If there is a leak, check the joints. Until the problem is solved.
6, after the final inspection is no problem, then fill with the filling around the toilet. In addition, the tile and cement contact surface of the floor decoration is filled with more than 1cm. After the cement mortar and bathroom floor tile are stable and firm, try flushing and no problem can be used.
Xiao Bian concludes: After we read the analysis of the structural profile of the squat toilet and the installation steps of the squatting pan, I believe that everyone has knowledge of the squatting pan, I hope that we can decorate it better for everyone in the renovation and for future happiness. Life brings more help.
Floor Drains,Floor Drain Trough,Floor Drain Trap Sealer,Floor Drain Vapor Trap
Heshan Jasupi Sanitary Ware , https://www.jasupifaucets.com