Qijia Classroom: Correct Inspection of Woodworking Construction Process Standards
Part of the carpentry depicts the five features of the house. If the facial features are not correct, the beauty does not matter. For carpentry construction, you need to pay attention to the following points:
Millennium boat plate
1, the material must be real materials, can not be shoddy, strictly in accordance with the budget and drawings.
2. All new brick walls and wooden walls on the walls of the bathroom, such as wardrobes and styling walls, must be painted on the brick wall and plywood damp-proof paint twice before the next process.
3, in the original wall to do wood ornaments, such as door covers, window covers, skirtings, etc., must be a layer of moisture-proof paper.
4, solid wood lines and veneer on the same line of sight, must be color harmony, texture relative.
5, Solid wood door line, window cover line, Taiwan mouth line, close mouth line and veneer closes must be tight, firm, flat.
6. The furniture door, the inner side of the wardrobe, the drawer wall, and the dark side of the door must be closed with flat wooden wire (except for the non-lining panels).
7, furniture, wooden doors, skirtings, ceilings, floors have strict operating standards.
Furniture: Use 18% wood board as furniture frame, 5 PCT board as back board, 12% wood board as drawer wall, 5 PCT board as drawer bottom board.
Wooden door: Use fir sliver plus double-sided 9 PCT board and double-sided decorative panel to make the door, the thickness can't be less than 4 centimeters.
Base line: Use 15 pcs. wood panels plus decorative panels and wood lines to make the base line.
Ceiling: Paper gypsum board ceiling is made of wood keel and fixed with high quality (Jin billion) screws.
Flooring: The mantle must be flushed, with a center-to-center spacing of 24.4 centimeters (except for the plywood floor), and floor pegs must be fixed on the pine keel.
8, kitchen, bathroom aluminum buckle plate ceiling must use wood square frame for the grass-roots level.
9, the drawer roll no less than 3 screws, together, hinges and other hardware a hole to a screw, one can not be less.
10, paste the panel, nail solid wood lines, glue can not be used less, but can not use.
11, to do partition or ceiling surface must use a plaster cover, when encountering walls, columns, beams, it is best to use outsourcing practices. Gypsum board wall must be lined with two layers of sound insulation cotton.
Renovation Carpentry Knowledge Carpentry Acceptance Construction Acceptance Furniture Wooden Doors and Windows House Paint Wall Cabinets Floor Tiles Drawers Kitchen Cabinet Doors Bathroom Ceilings Bathroom Doors
PH-B-L5
Phlizon 1000w/1500W/2000w /2500W/3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.
Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED Grow Lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.
1000w 2000w 3000w 1500w led Grow Light Features
Indoor grow light
COB series, high power branded CREE COB with high Par value and deeper penetration
VEG/BLOOM and STRONGER switches for each grow stage.
Special spectrum for plant growing to increase the yield.
Building to Harvest: Beneficial for seeding to fruiting stage.
Good quality fans with low noise.
Easy to install by minute
Energy Saving, environmental friendly
3 Years Warranty
We are a professional Chinese manufacturer of PH COB Series, and look forward to your cooperation!
PH-B-L5
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com