New housing mid-term acceptance should pay attention to factors

In addition to appraising the overall effect of decoration, the mid-decoration project acceptance mainly depends on whether the quality of the hand is satisfactory. Can be identified from the following aspects:

First, the lighting circuit should be laid in accordance with the regulations, sockets, lighting switches, the main gate, leakage switch, etc. should have a certain height, kitchen, air conditioning should be dedicated line laying, television antenna and telephone line to be installed in a convenient location for maintenance.

Second, the drainage should be smooth, no leakage, backflow and water phenomenon, high-grade water parts without clamp marks and rubbing phenomenon.

Third, the new masonry wall should be vertical, the same level of brick, joints evenly trim, brick seam does not exceed 1mm, the overall tile error is not more than 0.8cm.

Fourth, the overall production error of the plane ceiling shall not exceed 0.5, the crack between the board and the board shall not exceed 0.3mm, and the error of the plastic ceiling shall not exceed 0.5mm.

Five, wood sealing line, corner line, waistline veneer meets the seam not exceeding 0.2mm, the line and the line mouth slot joint does not exceed 0.3mm, the veneer and the plate meet does not exceed 0.2mm, the sliding surface error does not exceed the entire door 0.3mm. The paint should be smooth, feel good, no traces of scratches, no color difference and nailing within one meter.

6. The wall surface of the wall is straight and there is no obvious convexity and color difference within one meter. The construction quality is related to the quality of the construction team; it is also related to the unit price of the construction project. The best way is to sign a contract between the two parties before the start of construction to clarify the decoration requirements and acceptance criteria.

Entrance decoration restaurant decoration switch TV decoration socket lighting paint kitchen sliding door

Stainless Steel Wire Mesh

Stainless Steel Wire Mesh

Anping Sanxing Wire Mesh Factory produces Stainless Steel Wire Mesh from first class stainless steel wire materials in SUS302, 304, 316, 304L, 316L.
Typical Weaving Patterns for Stainless Steel Wire Mesh: Plain weave, twill weave, dutch weave.
General Use: Stainless steel wire mesh, with its excellent resistance against acid, alkali, heat and corrosion, find extensive uses in processing of oils, chemicals, food, pharmaceuticals, also sorting and screening of solid, liquid and gas in mine, metallurgy, airspace, machine making, etc.

Ss Wire Mesh,Stainless Steel Wire Mesh,304 Ss Mesh,316 Ss Mesh,Stainless Steel Woven Mesh

Anping Sanxing Wire Mesh Factory , https://www.sanxingwiremesh.com