Metal wallpaper construction method
Metal wallpaper construction method:
1. A layer of gold foil or tin foil on the surface of metal wallpapers will also conduct electricity, so be careful to avoid power lines, switches and other live lines.
2, because the wallpaper glue contains moisture, after the glue is erased, there is also the possibility of oxidation of the wallpaper surface. Therefore, the machine should be glued and the protective tape should be used correctly. In addition, it is also conceivable to carry out the construction by means of glue on the wall. Use the pressure roller to press the joint as much as possible, and do not use scraper towels. Especially when dealing with yin and yang.
3, due to its metal characteristics, so do not wipe with water or a damp cloth to avoid oxidation and blackening of the surface of the wallpaper. It is not good, use a sponge to gently test. Or try with wallpaper cleaner.
4, gold foil wallpaper is generally thin, the surface is smooth and easy to reflect, resulting in uneven bottom layer, fine particles will be unobstructed, so this paper has higher requirements on the wall surface, smooth and flat wall surface is the basic conditions before the paste. Because of the high degree of reflection of gold foil wallpaper, the seam is more obvious than ordinary paper. Please construct and customer description before construction, and confirm with the customer after 2~3 construction, the construction can be continued after the customer approves.
5. Try to use lap seams when laying. When cutting, keep the blades sharp (preferably using imported blades) and replace the blades in time. Do not open the door and ventilate within 48 hours after construction, and explain the maintenance precautions to the customer.
Reflective glass is clear or tinted glass that has a very thin layer of metal or metallic oxide on the surface. The reflective coating is applied during the float process. The thicker the glass is, the less light will pass through the window. The reflective coating reduces heat gain and glare from the outside while allowing visible light to enter. Toughened Reflective can be used directly, and also can be processed into Laminated Glass, Insulated Glass for windows, doors, building walls and so on.
Tempered Glass is often used in applications where using standard glass could pose a potential danger. Tempered glass is stronger than standard glass and does not shatter into large shards when broken. This is important, because it can greatly minimize potential danger in the case of a break. Manufactured through a process of extreme heating and rapid cooling, tempered glass is much harder than normal glass.
In the case that tempered glass does break, it shatters into small pebbles that are void of dangerous, sharp edges. As tempered glass is considered to be much safer than normal glass, you may often here it referred to as safety glass or TOUGHENED GLASS . Tempered glass has a wide variety of uses that you'll find just about everywhere. In fact, the shower doors in your bathroom or the side glass on a motor vehicle are examples of tempered glass.
Annealed float glass mainly clear float glass, ultra clear float glass, color tinted glass, reflective glass, they are substrate, can be processed into tempered glass, laminated glass, insulated glass, LOW-E glass, Frosted Glass , Back Painted Glass, Printed Glass , coated glass. Tinted reflective glass mainly brown, grey, blue, green. It can be processed into colored reflective tempered glass, Reflective tempered laminated glass, Reflective Insulated Glass and so on on customer's request.
Custom Tempered Reflective Glass, Reflective Tempered Insulated Glass, Tempered Glass Reflection, Reflective Laminated Glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglazing.com