How to prevent deformation of bamboo flooring?
Bamboo flooring is a kind of floor that modern people prefer. It not only looks good, but also compares energy saving and environmental protection. However, bamboo flooring will inevitably have some problems during use. How to prevent it from appearing during the daily use of bamboo flooring The problem? How to prevent deformation of bamboo flooring?
Possible deformation and prevention methods of bamboo flooring:
Bamboo floor cracking:
The reason for the cracking of the indoor bamboo floor is likely to be that the room is too dry, causing the floor panel to shrink and dry; the local board is easily soaked by the expansion after being soaked in water and damp; the expansion joint of the floor is not enough when installed, and it is easy to cause The floor is cracked. In order to avoid the indoor bamboo floor no longer appear cracking and changing table, it is necessary to maintain indoor ventilation, so that the indoor humidity is maintained between 40% and 80%. In winter, the humidifier can be used more; to avoid the floor being flooded, and not to use the wet mop Wipe the floor; reserve appropriate expansion joints when paving.
Bamboo floor paint cracking:
The main reason for the cracking of the indoor bamboo floor paint surface may be due to the moisture cracking or the indoor environment is too dry, causing the bamboo floor to shrink and crack; in order to avoid such a situation, it is necessary to maintain indoor ventilation to keep the indoor humidity at 40%-80. %between.
Bamboo floor tile deformation:
The moisture content of the bamboo floor itself is not well treated, and it is not within the range of 8%-12% specified by the state. Once it is dry or too wet, tile deformation may occur; at the time of installation, the wall edge or the fixed obstacle There is not enough expansion joints; the moisture-proof treatment is not in place or the floor is flooded, causing the floor to be deformed by moisture; the indoor humidity of the room does not meet the requirements for use; and the ordinary floor is used in the geothermal environment to cause deformation of the floor. Therefore, in the daily use of bamboo flooring, we must pay more attention to the throat, especially in the geothermal environment, we must choose a special geothermal bamboo floor; when paving, we must strictly follow the paving specifications and do moisture treatment, such as before paving. Check the waterproofing of the bathroom, balcony, kitchen, window sill and other locations connected to the floor covering area. If the pavement is on the bottom of the building, it is recommended to waterproof the floor or add moisture-proof layer. When the floor is wet, it can not be paved; keep indoor ventilation To make the indoor humidity suitable.
Bamboo floor discoloration:
The reason for the discoloration of the indoor bamboo floor is probably that the long-term strong light irradiation may cause discoloration of the floor; the moisture will also cause discoloration; some manufacturers' processing procedures such as the temperature during the carbonization process are not handled well, which may cause the floor to be used. Discoloration after a while. Therefore, during the use of the sun, in the strong sunshine season, you can consider pulling the curtains to avoid the floor being exposed to the sun for a long time; to prevent the floor from being flooded or damp.
Concerned about surprises
Label: How to prevent deformation of bamboo flooring?
Previous: Attention to timeliness in the production of aluminum profiles Next: Construction method of aluminum ceilings
Alloy steel refers to steel with high strength and good chemical stability at high temperature. It includes two types of anti oxidation steel (or high temperature resistant steel) and hot steel. Anti oxidation steel generally requires good chemical stability, but the capability is limited. High temperature strength and the corresponding oxidation resistance of heat and strong steel are required. Heat-Resistance Steel is often used in the manufacture of boiler, steam turbine, power machinery, industrial furnace and aviation, petrochemical and other industrial sectors in the work of the high temperature parts. In addition to the requirements of high temperature strength and high temperature oxidation corrosion, sufficient toughness, good shaping and welding are also required according to the different use, as well as a certain organizational stability. In addition, some new low chromium nickel oxidation are also developed .
Heat-Resistance Steel
Heat-Resistance Steel ,Heat-Resistant Material Handling Steel,Heat-Resistant Steel Tube,Heat-Resistant Black Round Steel Pipe
Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com