How is the installation process of insulation panels?
The so-called thermal insulation decorative board refers to a kind of decorative board commonly used in modern buildings, which is composed of thermal insulation materials and decorative materials. It is generally used for attaching and hanging on the outer wall surface of buildings. It has the dual functions of heat preservation and decoration. The function can be perfectly released in practical applications, then the key lies in the installation process, how is the insulation decoration board installation process? What installation precautions do you need?
Insulation decorative board installation process requirements:
1. Requirements for the installation of thermal insulation decorative panels for the base layer:
The special layered structure of the thermal insulation decorative board ensures that the thermal insulation decorative board itself is firm and flat. When the thermal insulation decorative board is installed normally, the base layer should reach the standard plastering, no cracking, no falling powder, no sand, no empty drum, no peeling, smooth surface, vertical vertical, vertical angle of yin and yang. Since the slight unevenness and roughness of the base wall can be adjusted by special mortar, the heat preservation decorative board has relatively low requirements on the flatness and smoothness of the base layer, and the treatment is relatively simple.
2. Paste of thermal insulation decorative board:
The thermal insulation decorative board is a light-weight board, and the weight of the product is only 8-10 kg per square meter. Therefore, only the special mortar is directly attached to the wall surface to meet the specified bonding strength requirement.
3. Anchoring of insulation board:
In order to completely eliminate the phenomenon of layered peeling of the heat-insulating decorative board, improve the overall safety of the heat-insulating decorative board, use the anchor, fasten the decorative layer, and firmly connect the heat-insulating decorative board to the wall again. This double fixed mode provides a comprehensive guarantee for the façade decoration of high-rise buildings.
4. Seam treatment of thermal insulation decorative board:
When installing the insulation decorative board on site, a seam of 5mm-10mm width is reserved between the two boards. When the mortar at the bottom of the finished board is dried, the foam is embedded in the joint, and the entire seam is filled with weather-resistant sealing silicone.
Concerned about surprises
Label: How is the installation process of insulation board?
Previous: How to identify inferior wires and cables? Next: Precautions for installation and operation of leakage protector
Cnc Milling Graphite Sealing Ring,Cnc Oil Pump,Custom Cnc Machining Auto Spare Parts,Cnc Parts Oil Pump Machinine
Chongqing Henghui Precision Mold Co., Ltd , https://www.citool.com