• Posted on

Grinding air compressor inlet and exhaust valves

When repairing the inlet and exhaust valves of air compressors, it is usually used to manually grind the valve port, which has low efficiency and poor effect. If on the drill press (as shown), use the drill chuck 1 to clamp the eccentric flange shaft 2 (The lower shaft is 3mm away from the center of the upper shaft), and then the rubber mat 3 with thick 20mm (the upper and lower ends are sawn into a mesh shape), placed on the lower shaft of the eccentric flange shaft 2, and pressed to the valve

V Type Deep Groove Ball Bearing

V-groove bearings are precision ground, double row, angular contact bearings. The concentric and adjustable bushings provide a simple, effective means of adjusting the free play of the guide wheel system. Ideal for linear motion applications where the bearing runs along a rail or track as well as cable guide applications.

Types: V-groove, U-groove, G-groove, guide wheel
Configurations: Sealed, Shielded, open
Materials: 52100 steel, stainless steel

NPB offers concentric and adjustable configurations, single and double row, in both inch and metric sizes from stock.

Typical applications include:
• Robotics
• Material handling
• Door actuation
• Pulleys

• Specialty applications

V Groove Ball Bearing17V Groove Ball BearingV Groove Ball BearingV Groove Ball Bearing


V Type Deep Groove Ball Bearing,High Speed V Groove Bearing,Miniature V Deep Groove Bearing,High Speed V Groove Ball Bearing

Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearing.com