Epoxy Floor How to Care for Epoxy Floor Acceptance Criteria
The floor can not only be very decorative, but also can make the whole home look more warm, so it is very popular products. The types of floors are also very numerous. What we need to know today is epoxy floor . How to maintain the epoxy floor ? What are the acceptance criteria? Here's to follow Xiaobian to understand it. 
Epoxy floorboards are very luminous; their useful life varies from 3 to 9 years, depending on the thickness. Epoxy flooring also has a lot of features, such as anti-slip, strong impact resistance, wear resistance, mold, dust, acid, etc., are all characteristics of epoxy floor. There are so many advantages of the floor, how to maintain it?
How to maintain the epoxy floor
1. Epoxy resin floors are generally used in workshops of various factories. Therefore, anyone who enters the workshop must change shoes so as not to bring the mud and sand in the workshop into the workshop and scratch the ground.
2. All hardware devices, such as iron chairs, iron tables, iron shelves, etc., must have their feet touching the floor wrapped in soft plastic or rubber to avoid scratching the floor during use. When cleaning the floor, use a soft mop or a wet or dry vacuum cleaner. Use clean water or detergent. However, please note that the floor is slippery;
3. If it is used for a long time, it may cause a simple local repair due to wear or scratches, but if the area is relatively large, it needs to be replaced.
4. When any equipment needs to enter the workshop, lay the bottom of the carton or the steel plate on the floor to avoid scratching the ground during transportation.
5. The wheeled equipment such as carts and trolleys must be either rigid or flexible rubber wheels and used separately inside and outside the factory building.
6. Regular waxing work. 
Epoxy floor acceptance criteria
The acceptance criteria for epoxy flooring is definitely different from other flooring.
1. When the temperature of the environment is 25°C, it should reach the level of dryness within 2 to 3 days after construction, that is, the hardness reaches about 80% of the complete curing.
2. The surface cannot appear sticky.
3. Pay attention to whether there is air bubble: flat coating type, mortar type without air bubble, self-leveling allows 1 small air bubble / 10 square meters.
4. Leveling is good, there is no hoe mark, and the large area interface is basically in a flat state. 
5. There is no floating color, the color is uniform and uniform, and a very indistinct color difference is allowed at the large area interface.
6. No coarse impurities, but allow minimal defects caused by floating dust in the air.
7. The floor surface should be smooth and smooth.
8. The effect of anti-slip surface of orange peel and mortar should be obvious. 
Edit Summary: The above is small series of instructions on how to maintain epoxy flooring and epoxy flooring acceptance criteria of friends, everyone reading this article then, for epoxy flooring should have a more specific understanding of it. I hope that the introduction of this article will make everyone no longer unfamiliar with epoxy floor.
Hex Flange Nut,Flange Lock Nut,Rotating Flange Nut,Galvanized Flange Nuts
NINGBO YWC IMP. & EXP. CO.,LTD , https://www.nbywc-fastener.com