As the hydraulic station is used for a longer period of time, it will certainly be contaminated to varying degrees. It is time to clean the hydraulic station, Dalan hydraulic friendly reminder, cleaning the hydraulic station need to pay attention to the 8 major items as shown below with the use of the hydraulic station for a longer time, will certainly be contaminated to varying degrees. It is time to clean the hydraulic station, Dalan hydraulic friendly reminder, the eight major things to pay attention to cleaning the hydraulic station are as follows:

1. Do not use kerosene, gasoline, alcohol, steam or other liquids to prevent corrosion of hydraulic components, pipelines, fuel tanks and seals;

2. During the cleaning process, the hydraulic pump is running and the cleaning medium is heated simultaneously. When the temperature of the cleaning fluid is (50-80) °C, the rubber slag in the system is easily removed;

3. During the cleaning process, the non-metallic hammer rod can be used to strike the oil pipe, which can be continuously tapped or tapped continuously to facilitate the removal of the attachments in the pipeline;

4, the intermittent operation of the hydraulic pump is conducive to improve the cleaning effect, the intermittent time is generally 10-30min;

5. A filter or strainer should be installed on the circuit of the cleaning oil circuit. At the beginning of cleaning, due to more impurities, an 80-mesh filter can be used, and the filter screen of 150 mesh or more is used in the later stage of cleaning;

6, the cleaning time is generally 48-60 hours, according to the complexity of the system, filtration accuracy requirements and pollution levels and other factors;

7. In order to prevent corrosion caused by external moisture, the hydraulic pump should continue to run until the temperature returns to normal;

8. After cleaning the hydraulic station, clean the cleaning oil in the circuit.







----- Editor-in-Chief: Dalan Oil Pump Motor 02-Procurement Consultant

Copyright http: / (Dalan Motor) Reprint, please indicate the source
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

PET Film

Tempered glass bending strength than untreated glass 3 ~ 5 times, up to 150 ~ 250 mpa, thermal stability improved 3 ~ 4 times, can withstand 200 ~ 250℃ temperature change, broken to form no sharp edges and corners of the particles, very small harm to the human body, is the most widely used safety building glass.

When someone stands in front of the mirror, time and temperature disappear automatically, and it becomes a normal mirror. The lights around the mirror can be turned on and off by hand gestures, which is very convenient.

The thermal insulation performance of dimming glass is more obvious than that of single-layer glass in energy saving and economic benefits. Its energy efficiency means reducing the consumption of coal for power generation, reducing emissions of carbon dioxide and other gases, and reducing environmental pollution.

It can be used in shower rooms and toilets without occupying too many places, but it can add a mysterious taste to our life. If the product has safety hazards or is inconvenient to use, it will be difficult for users to accept it. Therefore, smart dimming glass must be able to guarantee its quality and reliability, so as to win the trust and recognition of users.

PET Film,PET Film Sheet,PET Film Roll,PET Self-adhesive Film,PET Decoration Film,PET Smart Film

Tianqixun Technology , https://www.tqxdisplay.com