Anti-static shoes and wristbands should pay attention to what?

(a) Do not disconnect the wrist strap when operating it. Otherwise, it will lose the grounding effect. The first question in the use of various wristbands is that they are open-circuited, sometimes temporary, and sometimes disconnected for a long time, so that the grounding effect is lost. Some people therefore use a wristband detector to measure their on-off status, and some use a monitoring device to measure the open circuit of the wristband and increase the resistance.

(b) The wrist strap is buckled so that the contact resistance between the human skin and the wristband becomes larger (c) The resistance of some wristbands is the strap itself. When the strap touches the ground, its resistance is greatly reduced. The risk of electric shock to humans.

(d) Some wristbands claiming to be wireless are far less effective than wired ones.

(e) Anti-static shoes should have anti-static socks/insoles when they are worn, and work on the anti-static ground so that the static electricity carried by the human body can be conducted to the earth. Any excessive resistance or disconnection can cause harm to the human body. Static electricity. Therefore, some important human body resistance testers need to detect whether the shoes/socks/insoles worn by the human body and the total resistance of the human body are capable of leaking static electricity at any time.

(f) The wrist strap is connected to the ground using a special grounding cable with a socket. It cannot be clamped to the metal body on the table or desk because the resistance of these metal bodies to the ground can be large.

(g) Always check the resistance of the wristband.

PL Flanges

ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztpipevalve.com