What are the homemade creative flower pots? Homemade creative flower pot step method

In everyone's heart, there is an idea of ​​making things by yourself. The waste materials around you can turn waste into treasure. You can also create creative flowerpots by using small items that are idle by hand to maximize material utilization without wasting every minute. One thousand. Homemade creative flowerpots can reap the experience and are remembered to be warm in the future. Then everyone will follow the Xiaobian to see the relevant content of the homemade creative flower pot .

First, first you have to prepare the plastic bottles at home, don't throw them away, then introduce the simplest one.

1. Open a rectangular opening in the middle of the plastic bottle, and then make a few holes under the mouth for drainage.

2, then open a small hole in the front and back, you can let the line pass,

3, after you do it, wear them on the line first, hang it on the wall, then plant the plants on the soil.

Second, in this case, you need to go outside and buy a special mold for hydroponic plants.

1, first cut the plastic bottle from the middle, select the lower half, because it is hydroponics, you can use a larger plastic bottle

2, then draw a small vertical piece of about 2 cm in the lower half of the opening, press them, give them a fixed shape

3, then put the mold and the plant together, just fine.

Third, 1, or first cut the plastic bottle from the middle, the second half is longer,

2, after you have done a few holes on the cap, and then put a few holes in the bottom of the lower half,

3, put the first half in the lower half of the soil, put the plant on it.

Fourth, 1, first cut from the middle, the next one is longer

2, draw some cute patterns with paint, and then cut off some extra places with a utility knife, it is done

Fifth, 1, the plastic bottle is cut open from the middle, the next one is long.

2, use a utility knife to draw a vertical strip of 1 cm high and 3 cm wide in the plastic bottle

3. Bend the vertical bar downwards with a tape to complete it.

Sixth, open a rectangular hole directly from the middle to put the soil and plants into it.

Seventh, 1, cut the plastic bottle from the middle, and then put a few holes in the bottom,

2, the upper part of the shape with a utility knife, after the addition of soil, add plants can be

How about, I read the wonderful introduction about what homemade creative flower pots. Have you learned a lot about the homemade creative flower pots? I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.

More related wonderful reading:

What are the flower pots? Flowerpot making step method

What are the methods for making flower pots? Type of flower pot

How to make wooden flower pots? Wood flower pot placement skills

Advantages and disadvantages of cement pots

How to make a flower pot plastic bucket to make a flower pot

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.spiralfastdoor.com