Spring freshwater fish pond fertilization considerations
Organic fertilizers must be fully fermented. Spring fish ponds have low water temperatures and rich oxygen in water. Reasonable application of organic fertilizers is not only low cost, but also achieves good breeding results. The application of organic manure such as large manure and livestock manure in fish ponds must be fully fermented. Fertilizers that have been fermented and fermented and fully decomposed by organic matter can be reduced into oxygen consumption in water and absorbed and utilized by phytoplankton. It also kills pathogens in organic fertilizers.
Less application, uniform application, and diligent application of so-called less application, that is, tens of kilograms to 100 kilograms of organic fertilizer per acre; the so-called uniform application, that is, water and manure are evenly spilled throughout the pond, so that the fish pond is yellowish brown or oily. Green, no oil film on the water surface, the transparency is kept at 20 cm ~ 30 cm; the so-called diligence, that is, with the feeding of fish, whenever the water content of the pond drops, the transparency is more than 30 cm, then fertilize immediately.
According to the fish system, it is determined that the amount of fertilization is not the fish pond of the main carp and carp. Because of feeding the feed, the amount of fertilizer applied in spring should be reduced accordingly, so that the transparency is kept at 30 cm to 40 cm. As the temperature rises, the pond water will increase. getting bigger. Intensively raising high-yield squid and grass carp fish ponds, even if some carp and carp are mixed, it is not suitable for fertilization in spring.
Fertilizing time is good for sunny mornings. Pay attention to listening to (see) the weather forecast, not fertilizing on cloudy or rainy days. Phytoplankton grows through photosynthesis and fertilizes in the morning for 2 to 3 days in fine weather. It can promote the proliferation of microorganisms as quickly and best as possible, minimize the pollution of organic fertilizers and ensure the virtuous circulation of fish ponds. .
Regular water changes and fresh water quality If the accumulation of organic matter and various types of biological wastes in fish ponds, the oxygen content in the water, and the poor composition of plankton, will affect the growth of farmed fish. Therefore, it is necessary to exchange new water regularly to prevent the fish pond from being over-fertilized, and always keep the water quality “fat, live, tender and coolâ€.
In metal cutting, hole processing is the most common process. In hole processing, drill drilling is the basic process.
When drilling, if the hole on the workpiece is very deep, carbide deep hole drills should be used at this time.
Specially used for processing deep hole drills, deep hole drills. In processing, holes with an aperture ratio greater than 6 are usually called deep holes. Due to the poor rigidity of the drill rod, it is difficult to remove heat and debris during deep hole drilling, and it is easy to bend and vibrate. Cooling and cooling systems are usually used to solve cooling and chip removal problems. In the automotive, mold and aerospace industries, deep hole drill bits are very popular.
30Xd Extra Long Drill,Extra Long Drill Bits,Long Carbide Drills ,Extra Long Metal Drill Bits
ROYI CNC TOOL TAIXING CITY CO.,LTD , https://www.royitools.com