It's not difficult to master the main points of a rainy day decoration

Who says rain can't be renovated? As long as you have mastered the “2345 decoration law” during the construction process, rainy day construction is not difficult.

Rainy construction 2 Not suitable

Due to the special climate, there are two things that are not suitable for construction in the rainy season.

First, it is not suitable for feeding.

Second, do not paint.

Rainy Construction 3 Attention

In the rainy season, we must pay special attention to the details of the renovation.

First, a reasonable schedule. According to the changes in the weather, reasonable arrangements for the construction process and progress.

Second, pay attention to dust off the window. If you close the window, you should also use sprinkler and other methods to reduce dust in advance.

Third, pay attention to safety and fire prevention.

Rainy construction 4 delay

The construction period with four processes in the rainy season needs to be extended.

First of all, the drying time is delayed.

Second, the primary processing delay. Wall putty and wall lining need to be aired one day.

In addition, extend the wall drying time. The normal time is about two hours, and the rainy days will be extended according to the weather conditions.

Finally, the wood lacquer dries for no less than 3 hours.

>>> Links: Winter Decoration Strategy: Use the fireplace to “fit” warmth

Rainy construction 5 Avoid

The key to the construction of the rainy season is moisture protection. The following five kinds of activities should be avoided to avoid rainy days.

First, avoid rushing construction. When selecting artificial boards such as blockboards, the latest production date must be selected. The choice of wood keel materials, the best choice for the end of the processing time, moisture content is low.

Second, avoid the cement treatment. Do not buy cement on rainy days. When laying tiles on rainy days, it is best to cover kraft paper or plastic cloth on the surface of cement.

Third, to avoid laying the circuit to prevent short circuit moisture. In a place where the balcony is easy to get wet, be sure to wrap copper wires that are exposed outside the wires during embedding.

Fourth, avoid furniture. The air is wet in rainy days, the water absorption rate of the plate is high, the performance is unstable, deformation and cracking are easily caused, and the appearance and use are affected.

Fifth, to avoid the pavement floor. Floors in rainy days are prone to deformation or emptying, especially on the first floor, which is easy to return to the tide.

Entrance decoration children's room decoration cement window paint furniture fireplace floor tile

Threaded Rods

1. Correct selection of teeth

1) Before use, confirm whether the mechanical properties of the product meet the customer's requirements (such as the tensile strength of the Bolt and the safe load of the nut).

2) The length of the bolt should be selected properly, with 1-2 pitch exposed after tightening.

3) Before use, the thread should be kept clean.

2. How to use dental strips correctly

1) When tightening the teeth, pay attention to that the direction of force applied by the wrench should coincide with the axis of the screw, and do not tilt.

2) In the process of tightening, the force should not exceed the safety torque, and should be uniform. Try to use the torque wrench or socket.

3) Locking too fast will lead to locking, it is recommended not to use electric or pneumatic wrench.

4) Keep the thread clean. In order to ensure the smooth fit of screw and nut, it is recommended to put the product in a clean container and do not place it at will.

3. Standard of tooth bar maintenance

1) If there is slight damage to the removed tooth, screw and nut, the die and tap shall be used for repair.

2) The removed and repaired teeth, Screws and Nuts shall be maintained by means of oil bubble or lubricating oil, and shall be placed in order according to specifications, models and purposes.

4. Scrap standard

The bolts with obvious crack, broken thread, sliding, disorderly thread, screw tensile deformation, shear trace, etc. which can not be repaired by the on-site leader can be scrapped.

5. Specification parameters of tooth strips

Texture of material:

304/316

Product standard:

DIN975

Surface treatment:

turn into a good guy

Threaded Rods,Full Thread Rod Bolt,Hexagon Socketthread Rod Bolt,Stainless Steel Thread Rod Bolt

Suzhou Gubao Screws Co.,Ltd. , https://www.gbscrewes.com