Interpretation of building materials purchase and storage methods
After the Spring Festival, we have ushered in the peak season for the home improvement industry. We all know that China has a vast territory and the climate in the north and south is also very different. The northern spring is relatively dry, windy, and even presenting blow-off. The humidity in the air in the southern spring is very high, and a large number of household items are prone to mildew due to moisture. In view of this, in the Spring Festival decoration of South and North China, the purchase and storage methods of building materials are also different. Follow the small series together to understand the purchase of spring and building materials in the north and south and storage skills.
First, the northern decoration building materials purchase and storage methods
1, wood storage:
In order to prevent dry air and strong wind from causing drying and deformation of wood, wood should not be placed next to the air outlet or heating after entering the store. Be sure to store it carefully and place it neatly. Timber “laying neat†is not just visually “tidyâ€. For example, boards such as large core boards and wooden wires are placed on the site and must be strictly paved and compacted. If the board is tilted or if it is leaning against the wall, it can easily bend in the dry air.
2. Hydropower materials:
Line pipe materials, water pipes and other pipeline materials should also be laid horizontally and vertically, and avoid sun exposure, otherwise it will warp deformation.
3, paint coatings:
Need to stay away from pyrotechnics, place it in a cool, ventilated place, and keep it tightly closed when not in use to prevent evaporation of paint water.
4, buy tiles:
There is a large temperature difference between day and night in spring in northern China. Tiles that are selected for paving should have low water absorption. Generally speaking, the structure is fine, and the percussion sound is clear and pleasant. It is a porcelain tile with low water absorption, and the water absorption is high, the structure has many holes, and the percussion sound is dull and turbid. It is a ceramic tile with high water absorption, and ceramic tiles should be selected.
5, in the decoration should pay attention to wind
When the decoration should be kept in a state of ventilation, this can discharge indoor harmful gases. However, because there are more windy days in the spring in the north, sometimes it is accompanied by sand blowing, so it should be moderately ventilated. Especially after wall and tile works, the ventilation should not be too strong, otherwise it will cause the water to evaporate too quickly, the walls and ceilings will crack easily, the tiles will fall off easily, and the gray sand will cause pollution. It is advisable to ventilate around noon for three or four hours and only open the window ajar.
6, do a good job of fire prevention
In the spring, the air is dry and windy, and some of the paints, coatings, and other materials used in the decoration are flammable. Therefore, special attention should be paid to fire prevention. First of all, in the selection of materials, we must meet national standards. For example, ceilings should be made of non-combustible materials, and non-flammable or non-flammable materials should be used on walls, floors and grass-roots. Paint, paint, and other flammable materials are stored in a cool, well-ventilated place away from fire.
Spring decoration knowledge
Door panel: door panel is made of stainless steel 304 with no frame. Core materials are paper honeycomb, aluminum honeycomb, PU, EPS and etc. The installation sites of door lock, door closer and hinge are reinforced with square tubes of more than1.5mmthickness which are compression moulded by special technology.
Door frame: it is made of completely stainless steel 304. The connection types with wallboards are double-clip type and aluminum connection. The former is applied mostly to machine made wallboard and the latter hand made wallboard. The accessories are double window and lift type sweeping bar. The lock can be famous door lock or the owners can select lock brands themselves.
Specification: common sizes 800X2100, 900X2100, 1500X2100 or1800X2100, can customize to customers` requirements, the materials can be selected according to customers` requirements such as306Lor other special materials.
Features: the stainless steel 304 door we produced are of elegant appearance, sturdy and durable, acid and rotting resistance and thermal insulation. It is the first choice for high-end projects at home and engineering concerning foreign affairs that requires for anticorrosion and high quality such as electronics factory and food factory
Hospital Sliding Door,Hospital Automatic Sliding Door,Hospital Sliding Glass Door,Hospital Sliding Ward Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com