How to install a single-hole faucet installation method steps
The faucet plays an indispensable role in life, and the types of faucets are also divided into many types. However, for faucet installation, everyone is still rather vague, and following Xiaobian together to understand the installation steps of the single-hole faucet.
A single hole faucet installation steps
step 1
First remove the copper fixing base
Step 2
Rotate the nut counterclockwise from the threaded tube
Step 3
Yellow hose wrench, nut, threaded pipe, silicone pad
Step 4
The hose runs through the vessels to be installed (sinks, basins, etc.) NOTE: The silicone pad is flanked on both sides of the vessel and tightened to secure it.
Step 5
The small end of the hose is screwed into the inlet of the faucet by hand, and it can be screwed and screwed, without using any other tools.
Step 6
Screw the threaded tube into the underside of the tap. The silicone pad on the upper side of the vessel can now be placed on the underside of the tap.
Step 7
Nut fixing faucet, nut tightening, installation completed
Second, tap installation considerations
1, remove debris
When installing, all impurities in the pipeline should be completely removed. Spool damage, jamming, clogging, and leakage can be avoided. At the same time, the surface should be cleaned so that no building material remains.
2, metal hose
The showerhead metal hose of the bathtub faucet should maintain a natural stretch and should not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention to the joint between the hose and the valve body not to form a dead angle, so as not to break or damage the hose.
3, do not screw
No need to use excessive force on the switch when using any type of spout product, just gently twist or toggle it. Even traditional taps do not need to be screwed to death. In particular, do not use the handle as a handrail to support or use it. The product with a screen cover at the outlet should be disassembled after a period of use to remove impurities. Products with hoses should be made so that the hoses are always kept in a natural stretch so that they do not break.
4, small hair disease
Taps that are used in the near future can sometimes cause incomplete shut-off, leakage, loose handles, and loose connections at the connection ports. Under normal circumstances, consumers can solve the problem on their own.
Reminder: For more information, please pay attention to the information on this website , or you can visit our offline experience directly.
More exciting recommendations
Huida bathroom prices
American standard bathroom official website
Faenza bathroom how
Wrigley how to bathroom
Kohler bathroom how
Sanitary Ware Top Ten Brands
Hot and cold faucet faucet ten brand bathroom faucet
step Drill Bit is a drill bit that has the tip ground down to a different diameter. The transition between this ground diameter and the original diameter is either straight, to form a counterbore, or angled, to form a countersink.
The advantage to this style is that both diameters have the same flute characteristics, which keeps the bit from clogging when drilling in softer materials, such as aluminum;. Most of these bits are custom-made for each application, which makes them more expensive.
Step Dril Bit,Metal Drill Bit,Drill Bit For Metal,Hole Cutter Step Drill Bits
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com