Rebar bending machine equipment assembly The repaired parts and prepared qualified spare parts are assembled and adjusted according to certain process requirements, and the entire technical process that meets the specified technical conditions and functions is called the rebar bending hoop. Assembly of machine equipment. It belongs to the category of repair and is an important part of equipment maintenance. Assembly includes parts assembly, component assembly and equipment assembly.
There are two basic requirements for equipment assembly: one is the selection and application of the most suitable equipment assembly process regulations; the second is the need for meticulous and thorough assembly preparation.
Preparation for assembly The following four aspects should be prepared in advance before assembling the rebar bending machine equipment:
(1) The assembler must understand and understand the functional purpose, structure, working principle and adjustment method of the installed steel bar bending machine. Need to read the assembly drawings and related technical requirements.
(2) According to the site conditions, select a specific assembly method and determine the assembly sequence. Pay attention to component identification to avoid confusion.
(3) Carefully and carefully prepare the tools, tools, measuring tools and related spare parts required for the assembly of various processes, and prepare the various materials involved in the assembly.
(4) Parts must be fully cleaned and cleaned before assembly, and the overall condition and surface defects, deformation, scratches, burrs, etc. should be inspected and retested.


Reprinted address: http: //

================================================== ================================================== ======

Vertical Slurry Pumps

Shijiazhuang Naipu vertical slurry pumps including SP,SPR type. They are vertical,centrifugal slurry pump submerged in sump to work.They are designed for delivering abrasive,large particle and high density slurries.These pumps do not need any shaft seal and selaing water.They can also be operated normally for insufficient suction duties.

NP-AF froth pumps are suitable for handling solids-liquid mixture,special for delivering frothy pulpgenerated in flotation machines in metalliferous and coal flotation circuits.

NP-ZJQ submersible slurry motor pump is a kind of hydraulic mechanism which motor connects directly with pump.The main impeller is used for absorbing and delivering sold-liquid mixture,the vice impeller is used for spraying or stirring solid-liquid mixture to help the impeller delivering

NP-SP Vertical Slurry Pumps,NP-SPR Vertical Slurry Pumps,NP-AF Vertical Froth Pumps,Vertical Slurry Pumps

Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com