En 2.4375 Nickel Alloy Coil Monel K-500 Stainless Steel Strip N05500
Model NO.: EN2.4375
Coil Thickness: 0.2mm-100mm
Width: 3.5mm-2600mm
Length: as Customer′s Requirement
Brand: Baosteel,Tisco,Posco
MOQ: 1 Ton
Delivery Time: 7~15 Days
Shipment: EXW,Fob,CFR,CIF
Payment: T/T,L/C
Technique: Cold Rolled/Hot Rolled
Surface Treatment: 2b/8k/Ba/No.1/Mirror
Trademark: luyesteel
Transport Package: International Standard Export Packing
Specification: ASTM, EN, AISI, ASME, DIN, JIS, GB, ISO, SGS
Origin: Tianjin, China
HS Code: 721990000
Monel K-500 Nickel Alloy Stainless Steel Sheet/Plate DIN/EN 2.4375Monel K-500 combines Monel 400's excellent corrosion resistance with greater strength and hardness as a result of adding aluminum and titaniumand proper heat treatment to cause precipitation hardening. It is nonmagnetic at temperatures as low as -101ºC. Monel K-500 has excellent dimensional stability which is very useful in high precision devices. Like Monel 400, it does not undergo ductile-to-brittle transition at cryogenic temperatures as low as that of liquid hydrogen. Its tensile and yield strengths increase while ductility and toughness are only slightly impaired.
Standard:
Monel K-500 Â UNS: No.N05500 DIN/EN:2.4375
Â
| Type | Alloy steel coil/strip |
| Width | 2mm-2600mm |
| Thickness | 0.2mm-100mm |
| Length | as customer's requirements |
| Finish | NO. 1,2B,NO.4,BA,8K |
| Standard | ASME, ASTM, EN, BS, GB, DIN, JIS etc |
| Materials | nickle alloy |
| Packing | 1. woven bag  2. wooden case |
Characteristics:Â
1. Good mechanical propertiesÂ
2. Yield tensile strength
3.Highly resistant to chloride and sulfide stress corrosion cracking
4. Resistant to aqueous corrosion and chloride ion stress corrosion cracking
5. High temperature resistant
6. Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
7. Excellent welding characteristics
Chemical composition
| % | Ni | Cu | Fe | C | Mn | Si | S | Al | Ti |
| min | 63.0 | 27.0 | Â | Â | Â | Â | Â | 2.30 | 0.35 |
| max | Â | 33.0 | 2.0 | 0.18 | 1.5 | 0.50 | 0.010 | 3.15 | 0.85 |
Physical properties:
| Density | 8.44 g/cm3 |
| Melting range | 1315-1350ºC |
Applications:
Chemical process pump and valve components; paper production pulp processing doctor blades and scrapers; marine engineering chains, cables, fasteners and springs; electronic components; and oil and gas production non-magnetic housings, pump shafts and impellers.
Â
| Product Category | Specification(mm) | Grade | ||
| Heat-resisting Superalloy Anticorrosion Alloy | Hot-rolled Bar |  diameter (length of side) | Φ10~85 , 30~85 | FN-2,RA333, A-286,V-57,Inconel706, Incoloy901,Incoloy903, Incoloy907, HastelloyX,Inconel600, Inconel625,HastelloyC-4, HastelloyB,HastelloyC-276,Inconel718,R26,Nimonic80A,Nimonic90,Nimonic93,Nimonic105,Nimonic118,Rene41,InconelX-750,C263, U720Li,Waspalloy,Hastelloy188,Hayness-25,BAT-45Y,AHB-300,GMR-235D,B-1900,In100,Rene100,In713C,TRW-VIA,In738,X-40,Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625 |
| Forged Bar | diameter (length of side) | Φ 90~250 | ||
| Hot-rolled Sheet | thickness×width×length | 5.0~8.0×650~700×1000~2000 | ||
| Cold-rolled Sheet | thickness×width×length | 0.8~4.0×700~1000×400~2000 | ||
| Cold-drawn -Steel | diameter            hexagon length of side | Φ8.0~35.0                    S 8.0~32.0 | ||
| Forged Shaft | diameter (length of side) | Φ 200~450 | ||
| Forged Disc |  diameter (length of side) | Φ500~1000×≥100 | ||
| Forged Die Block | length of side mm | 200~500 | ||
| Precision Alloy | Cold-rolled Strip | thickness×width | 0.03~3.0×≤300 | Alloy1,AMS7717B,Alloy 3,Type 2,Alloy 4,Alloy 4,FeC |
| Hot-rolled Bar | diameter (length of side) | Â 21~55 | ||
| Hot-rolled Flat Steel | thickness×width |  3.5~13×≤300, 8~20×≤450 | ||
| Cold-drawing Wire | diameter (length of side) | 0.1~8.0 | ||
Packing: standard export packing, seaworthy packing, bundles, plastic bag, woven bag, wooden cases, plywood case, iron case, or as per customer require.
Our Advantages:
1. More than 200 patterns
2. Bottom price
3. Reliable quality and service
4. Fast delivery
We will reply you in 24 hours. Please remember check your inbox.
Welcome to inquiry. Looking forward to cooperating with you in the near future.
FC165 Gas Can for Gas Nailer Gas Fuel Cell ,Gas Fuel Cell for Gas Powered Construction Tools
Specifications:
Model NO.: FC165
Size: Ø31.5*165mm (1.24" x 6.50"
Content :Propane + Butane
Pressure :16 ~ 18bar
Net Weight :40g/80ml (1.41Oz)
Shots Qty :1,200 shots (approx.)
Certificate:
CE
Applications
- Fastening with GCN40,GCN40SP,GFN3490,GCN40L,GI200 and other most famous models of framing gun.
Heheng Technology Gas Fuel Cell FC165
Gas Fuel Cell,Gas Can For Gas Gun Nailer,Propane And Butane Fuel Cell,Gas Fuel Cell,Gas Fuel Cell for Gas Powered Construction Tools
Yibin Heheng Technology Co.,Ltd , https://www.chinadirectfastening.com