Do not leave 5 regrets in the decoration
Regret 1 : No air conditioning holes were played in advance
The regret tells: When the decoration is catching up with the winter , so did not think to want to hit the air conditioning hole, wait until the summer to air conditioning when the hole that is hit now. When the hole was drilled, the drill went up and made the wall in the bedroom a big face. It was very ugly.
Unfortunately remedy: As the use of rhinestones for air conditioning holes will stain the walls, it is advisable to consider the location of the air conditioning and the height of the suspension when decorating. If you decide to use air conditioning, it is best to beat the air conditioning holes before blowing white. it is good  Regret 2 : The entrance door size does not leave more than regrets about: This I have a deep understanding, my home is to buy the wooden door of the Bo Luo Wei, quality service is saying, but the door is installed, the trouble comes, when the installation of the living room into the household At the second door, only the thickness of the floor was taken into account, and the thickness of the floor mat was not taken into account. As a result, there was almost no excess after the floor was finished. Originally wanted to put a beautiful floor mat at the entrance, it now seems impossible to achieve. Unfortunately remedy: When installing the door, be sure to fully consider the thickness of the floor, floor tiles, floor mats, etc., leaving more than in advance.  Regret 3 : The location of the power supply is not reasonable Regrets that: When the bedroom was wired, it was not measured accurately. Instead, the location of the power outlet was determined by visual inspection. As a result, when the computer desk was bought and returned home, it was discovered that the position of the table leg was just blocking the position of the power outlet. There was no way to replace it with a socket, and the line went out. Unfortunately remedy : Before arranging the position of the bedroom power outlet, the dimensions of the furniture to be placed should be provided to the electrician as accurately as possible. In addition, under the premise of not affecting the appearance, as many as possible to reserve a few outlets, sooner or later in the future to use.  Regret 4 : The top light did not make a dual control regret statement: After only six months of renovation, I heard that the ceiling light can be dual-controlled, a switch beside the door, and a switch beside the bed so that I can save the lights in the bed in the winter.
Unfortunately remedy: During the renovation process, communicate with friends and worker masters to find a fitting solution suitable for your home. If you can not do double control lights, you can install the controller on the ceiling light, turn the top light into a remote control, can also achieve dual control effect. Â Regret 5 : The background wall has no reserved wall outlet. Unfortunately, when the TV background wall is decorated, the patronizing the overall effect ignores its practical function and forgets to reserve the wall outlet's power outlet. No way, LCD TVs can only be placed on TV cabinets, and they feel depressing. If you hang up, you have to take the open line. It's ugly.
Unfortunately remedy: If the owner uses an LCD TV at home, be sure to leave a wall outlet on the wall. If the TV cabinet is of a standard height, even if the TV is placed on a TV cabinet, the wall outlet can be blocked without affecting the appearance.
TV decoration socket switch living room background home decoration living room floor tile door mat bedroom TV background wall decoration home bedroom lamp
The type code of tapered roller bearings is 30000, and the tapered roller bearings are separable bearings. In general, especially in the size range involved in GB/T307.1-94 "Rolling Bearings - Tolerances for Radial Bearings", the outer ring and the inner assembly of tapered roller bearings are 100% interchangeable.
The angle of the outer ring and the diameter of the outer raceway have been standardized in the same way as the outer dimensions. Changes are not allowed at the time of design manufacturing. As a result, the outer ring and inner assembly of tapered roller bearings are universally interchangeable worldwide.
Tapered roller bearings are mainly used to bear combined radial and axial loads, mainly radial loads. Compared with Angular Contact Ball Bearings, the load carrying capacity is large and the ultimate speed is low. Tapered roller bearings are capable of bearing axial loads in one direction and are able to limit the axial displacement of the shaft or housing in one direction
Cylindrical Roller Bearings,Bearing 30208,Cyl Roller Bearing,Cylindrical Taper Roller Bearing
Hebei Fangqiang bearing manufacturing Co., LTD , https://www.fangqiangbearing.com