What kind of sheet is used for tatami platform?
What kind of materials do tatami want to make tatami in the bedroom or balcony, then, what precautions? Collected some information, we learn together. Now do tatami, under normal circumstances, is the use of wood board base, if you want to do storage grid, we must pay attention to the following points:
1, try to use quality wood board.
2, the best grass-roots paint. Closed. To prevent worms, if you do not use storage, do not paint.
3. The place where tatami is made is because of the paving tile. There is not much area and no money. Everything is clean inside and out.
4. It is very good to make a box of tatami mats. Putting the shoes that are not worn for the time can save space. The spacing of each storage space is not too large, too large, the upper deck is unable to withstand the weight.
5, the partition between the balcony and the living room to see your environment, if you consider the insulation, then you can use (color) aluminum alloy partition, easy to clean, light insulation. If you do not consider insulation, use decorative plates or gypsum ornaments to be a symbolic The short partitions are sufficient, and the business is broad and it is beneficial to expand the room of sight in the room. If you want to completely separate the second bedroom from the living room balcony, you can use a wardrobe locker or a desk or something. Tatami mainly depends on your height. If there are only 10 or more CMs, it is not necessary, and there is no special requirement for tatami to be inconvenient. The real tatami is purchased from Japan. The method of making the platform is very simple. Use a wooden or 15mm plate to make a shelf, and then lay a layer of 15mm large core on it. The material above is decided by oneself, but you cannot use materials that require cement, such as ceramic tiles. In short, if the platform is made of solid wood, it is not recommended to use Daxing board. Too much glue will cause great smell and no environmental protection. Made of solid wood, put a table on it, put on the tea ceremony, put two grass mats.
The above information, relevant Baoyuan plate supply information, plate purchase, etc. Please pay attention to the Chinese plate trading network
UV accelerated aging test chamber
A UV accelerated aging test chamber is a specialized piece of equipment used to simulate the effects of long-term exposure to ultraviolet (UV) radiation on various materials and products. It is commonly used in industries such as automotive, aerospace, cosmetics, and electronics to evaluate the durability and performance of materials under accelerated aging conditions.
The chamber typically consists of a controlled environment with UV lamps that emit high-intensity UV radiation, simulating the UV exposure that materials would experience over an extended period. The UV lamps produce a spectrum of UV light, including UVA, UVB, and UVC, which can be adjusted to mimic specific environmental conditions.
The test specimens or products are placed inside the chamber, and the UV lamps are turned on to initiate the aging process. The chamber may also incorporate other environmental factors such as temperature, humidity, and airflow to simulate real-world conditions more accurately.
The accelerated aging process allows manufacturers to assess the effects of UV radiation on the materials' physical, chemical, and mechanical properties. It helps determine the degradation, discoloration, embrittlement, cracking, or other changes that may occur over time due to UV exposure.
UV accelerated aging test chambers are essential for quality control, product development, and compliance with industry standards and regulations. They enable manufacturers to evaluate the performance and lifespan of materials, optimize formulations, and make informed decisions about product design, materials selection, and UV protection measures.
UV aging test chamber, UV accelerated aging test chamber, UV test chamber
Dongguan Best Instrument Technology Co., Ltd , https://www.dgbestinstrument.com