Home>Bearing knowledge>The basic type of one-way thrust angle touch ball bearing

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

The fundamental type of one-way thrust angle touch ball bearing

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The one-way thrust angle touch ball bearing is a fine bearing; the public service is more than the 饕糜诨 mining system tomb 榧 cylinder. This kind of bearing is characterized by high rigidity; low conflict; and is suitable for high-speed occasions with agile change of direction. They can't be split.
Fundamental type
The FAG single thrust angle touch ball bearing has a dimensional dimension of the DIN616 specification. They are divided into 7602 series and 7603 series; the journal diameter is 12-100mm.
About the 60° touch angle; FAG single thrust angle touch ball bearings can transmit large axial loads.
They are also capable of accepting small radial loads. Like all angular touch ball bearings; one-way thrust angle touches can only accept one-way loads.

---

Recommend to friends comments close window

Bearing related knowledge

Demystifying the leading bearing constant temperature system of VSI's new sand making machine: How to "protect and clear IKO bearings" for equipment and adjustment of "high-speed bearing" equipment High quality tapered roller bearing 32011X Four common failure conditions of FAG imported bearings

This article links to http://
Please indicate China Bearing Network http://

Previous:Characteristics of reverse bearing support Next: Analysis of the mechanism of shaft voltage and shaft current of variable frequency motor (1)

1. Product Introduction

Carburizing agent, there are many kinds of raw materials, production processes are different. It has wood carbon, carbon coal, coke, and graphite type in which various categories and a lot of small types. High quality carburizing agent generally refers to after graphite carburant. Under the high temperature, the carbon atoms arranged in graphite morphology,so called for graphitization. graphitization can reduce the content of impurities in the carburant, increase carbon content and reduce sulfur content.It used for casting steel and iron. With high carbon and low sulfur, low water content and low cost characters.

2. Classification

At present, there are 3 kinds of commonly used carburetant:

First, graphite powder, which is a vacuum powder by graphite electrode processing.

Second after petroleum coke, which is used in some domestic steel plant to make of carburizing agent.

Third is the graphitized petroleum coke, which is also used as recarburizer in steel making.  

3. Application 

Induction furnace carburizing; cupola furnace carburizing; double process carburizing; furnace ladle with the current carburizing

4. Process  

Take the Taixi Anthracite into the graphite furnace, in accordance with the power curve send to the furnace power, under the high temperature of 800 DEG --1350 DEG C,it occurs a series of physical and chemical reactions, and discharge the sulfur content, moisture, volatile, ash and other impurities, and then cooling, crushing,  packaging and storage according to the size requirements of service.

The raw materials from the top into the tank feeding device during the calcination, in the process of moving from the top to down,it  being located  by tank fire on both sides of the heating. The heat in the combustion is generated by the fire wall directly to the raw materials. When  the raw materials` temperature reached 350~600 degrees,the large number of volatiles released through volatilization. Then collected and sent to the burning fire lane. The volatile combustion is another source of heat pot calciner. Raw temperature after above1200 to 1300 DEG C`s incineration, it completes a series of physical and chemical changes, then from the bottom of the material tank into the water cooling, and finally discharged outside the furnace  by the feeding device .

The carburizing agent after the calcination, then after cooling and into the roll crusher, sorting, crushing, in order the  granularity reached: 0--1mm, 1--3mm, 3--5mm, 5--8mm, 8--10mm, 10--25mm, etc., and then packaging according to different needs of customers.  

5. Transportation and Packing

Woven bag, lined with plastic film bags, each 25kg can also be packaged according to customer demand.

The product should be placed in a cool and dry place during storage, transport process, prevent and hard material mixed, to prevent carbon particles broken, affecting the quality of packaging to prevent breakage. To avoid leakage or mixed with debris, water, oil and fire.

    

 

Graphite Carburizing Agent

Filter Material,Quartz Sand,Filter Media Rolls,Water Filter Material

Ningxia YiFeng RuiDa Activated Carbon Co.,LTD , https://www.nxyfrdhxt.com