The 1st Plenary Meeting of the 2nd Council of China Labor Protection Federation was held in Beijing

On January 18, 2018, the first plenary session of the 2nd Council of the China Labor Protective Equipment Federation was held in Xijiao Hotel, Beijing. The Director of the International Cooperation Exchange Center of the State Administration of Work Safety and the Honorary President of the China Labor Protection Federation Chen Comrade Jiang made a summary report on his work since the alliance was established three years ago.

At the same time, the list of proposed 2017 spot checks for the safety and quality assessment of labor protection products in China and the 2018 China labor protection product safety and quality assessment plan will be publicized recently in the laborers’ network. Please pay attention.

The contents of the work report of the second session of the First Plenary Assembly are as follows:

(I) Improve the organizational structure and promote the building of the alliance itself.

In order to strengthen the industry integration capability of the alliance and promote the development of the labor protection industry, the Coalition established the China Labor Protective Equipment Federation Expert Committee and the China Labor Protection Equipment Union Dealer Working Committee in May 2015 and September 2016 respectively. The Alliance Committee of Experts is dedicated to exerting its advantages in the Union, and assisting the experts in the industry to promote scientific and technological progress in labor protection products, increase the technical content of labor protection products, increase the level of individual protection of laborers, and contribute to accelerating the development of the labor protection industry in China. The Union Dealer Working Committee aims to strengthen the standardized operation of the domestic labor protection product distributor industry, serve distributors at all levels, effectively protect its legitimate rights and interests, create a standardized and orderly business environment, purify the market order of labor protection supplies, and establish production enterprises. Information exchange with distributors, long-term effective exchange and cooperation mechanism. Through the establishment of these two professional committees, the alliance has been optimized in the organization and the capabilities of the service industry have been further enhanced.

(2) To investigate the situation of labor protection supplies in key industries and carry out relevant laws and standards.

In the past three years, the Alliance has organized experts to travel to Beijing, Shanghai, Liaoning, Shaanxi, Shandong, Anhui, Jiangsu, Zhejiang, and Guangdong to select typical companies in key industries such as petroleum, chemicals, coal, electricity, metallurgy, and machinery manufacturing for field research. . Through investigation, we have learned about the level of labor protection of front-line workers in China, found out the status quo of labor protection supplies and market demand in China, and displayed high-quality labor protection supplies for some coalition member units, pointing the way for the R&D and technology upgrading of labor protection products in China. . At the same time, in conjunction with research activities, we have entered the enterprise and entered the grassroots level, using preaching, seminars, seminars, dialogues, etc., to publicize the latest regulatory standards in the field of labor protection in China, and to increase the importance attached to the work protection work by managers and front-line operators. . These activities through the media coverage of the central news media, in the whole society to create a "love for life, people-oriented" concept, and constantly guide public opinion on labor protection.

(c) Organize enterprises to participate in industry exhibition activities to increase the visibility of the alliance and member units.

The exhibition is an indispensable information platform for understanding new technologies and new products, exploring new directions for technological development, and understanding peers and peers. Since 2015, the alliance has organized some outstanding member units to form a unified logo, and participated in the “The 2nd China International Chemical Safety Technology and Equipment Exhibition” held in Ningbo in September 2015 with the overall image of the alliance. In October, Dusselt, Germany The "International Exhibition on Industrial Safety and Health (A+A)" held in Dorf and the "8th China International Exhibition on Safety in Production and Occupational Health" held in Beijing in September 2016 demonstrate the company's own brand image. Improve the product visibility and market share provides a platform. With this platform, the new image, new momentum, and new achievements of China's labor protection industry are displayed. Through the integration of cross-border resources integration and technological innovation between upstream and downstream industrial chains of different industries, it has played a very important role in improving the overall scientific and technological level, management level, and international competitiveness of China's labor protection industry.

(D) In-depth implementation of national policies and regulations, and create a new era of labor protection industry reform and development.

1. Establish a traceability system for labor protection products in China.

According to the Opinions of the General Office of the State Council on Accelerating the Construction of the Traceability System for Important Products (Guoban issued No. 2015 [95]) and the Ministry of Commerce, the Ministry of Public Security, the General Administration of Quality Supervision, the State Administration of Quality Supervision, and the State Administration of Safety Supervision issued by seven ministries and commissions The spirit of the “Guidelines for the Construction of Key Product Informatization Traceability System” (Zhao Zhi Fa [2017] No. 53), the alliance took the lead in setting up the traceability system for labor protection products in 2015, and with the help of the national Internet platform, it will soon be It forms a structure that integrates back-end system management with a front-end mobile phone APP ("worker") and integrates functions such as industry news release, security knowledge dissemination, and accident case analysis. The successful development of tracking traceability system is the first time that China has realized the whole lifecycle management and individual industry chain tracking of individual protection products. In January 2016, the Alliance held its first briefing session and listened to opinions from relevant industry participants. In March and July, the Alliance held the "China Labor Protection Equipment Traceability System Test Training Meeting" in Beijing and Hefei. It officially opened in Beijing in September. Announced that the system went live. In February 2017, the 2.0 version was upgraded to further strengthen security management, increase the comparison function of test reports, and improve the convenience of back-office operations, so as to further enhance the company's quality management capabilities, promote regulatory innovation, and ensure consumer safety. purpose.

2. Organize and carry out safety and quality assessment activities for labor protection products in China .

In order to promote the overall quality of labor protection products in China and promote the development of the labor protection industry in China, from 2016, the coalition united with the Beijing Municipal Institute of Labor Protection, the Shanghai Institute of Safe Production, and the National Oil Production Testing and Inspection Center for Shengli Oil Production The China Labor Safety Science and Technology Research Center of the China Institute of Safe Production jointly organized and launched the "China's Labor Safety Products Safety and Quality Assessment Activities" and formulated a safety and quality evaluation system for labor protection products. According to the implementation requirements of the system, all participating products and evaluation results will be publicized and promoted on the Internet, focusing on the pertinence and effectiveness of publicity, timely publicizing the safety and quality assessment results of labor protection products, and providing targeted assessments of the safety and quality of labor protection products. The report is reported to the safety supervision departments of the headquarters of the central enterprises, the safety supervision departments of local key enterprises, and the occupational health management departments of foreign-funded enterprises in China, and accept the supervision of the whole society.

The "Safety and Quality Assessment of China's Labor Protection Products" activity has been held twice. A total of 236 products were submitted for application. Eleven Grade 5A products, 62 Grade 4A products, and 115 Grade 3A products were selected. The product range covered Headroom protection, respiratory protection, hand and foot protection, clothing protection, fall protection and other eight areas have attracted the attention of many people inside and outside the industry. The Alliance has established a “Enterprise Defence Session” on the basis of extensive listening to opinions from production parties, distribution units, users, testing and inspection agencies, etc., and conducts “blind pumping” inspections on all award-winning products to ensure a steady increase in product quality. .

3. Establish a one-stop trading platform for national labor protection products.

In April 2017, in accordance with the requirements of the Party Central Committee and the State Council, we vigorously promoted the implementation of the “Industrial + Internet” strategy and created a national “Industrial + Internet” trading platform. The alliance and Sinopec International Business Co., Ltd. jointly established a one-stop national labor protection product. Trading platform. The two sides signed a memorandum of cooperation. The two sides agreed that all labor protection products in the platform can be traced back to the national level so that counterfeit and shoddy products can be detected in a timely manner to ensure the stable and reliable quality of the platform products.

November 2017 China Labor Protection Union and Sinopec Wuhan Branch held an international clothing seminar

In September 2017, the signing ceremony for the first batch of on-line companies of national labor protection products one-stop trading platform was held in Wuhan. In November, the one-stop trading platform was announced for trial.

(V) Actively carry out communication and cooperation with international and foreign advanced organizations

1, to establish a comprehensive strategic partnership with the European Committee for Standardization Professional Committee of PPE (ESF).

Joint Memorandum of Understanding was signed between China Federation of Labor Protective Equipment and Respiratory Protection (ISOTC94/SC15), National Institute of Occupational Safety and Health (NIOSH), International Association for Respiratory Protection (ISRP), and International Occupational Health Association (IOHA).

In October 2015, the alliance went to Düsseldorf, Germany to participate in the "International Exhibition on Industrial Safety and Health Products (A+A)" and held during the exhibition "China PPE Coalition and European Union Standardization Committee PPE Professional Committee ( ESF) Standard Cooperation Symposium, discussing the cooperation between the two parties with the European Union Standardization Committee PPE Professional Committee (ESF). This is the first time that the alliance has appeared in overseas exhibitions. It is also the first step taken by the alliance with foreign organizations and the EU. At the "8th China International Safe Production and Occupational Health Exhibition" in September 2016, the Alliance signed an agreement with the European Union Standardization Committee PPE Professional Committee (ESF) to establish a comprehensive strategic partnership. According to the contents of the agreement, both parties agree to hold the "China International Safe Production and Occupational Health Exhibition" in September or October each year or the "International Exhibition on Industrial Safety and Health Products (A+A)" in Dusseldorf, Germany and the EU. The International Organization for Standardization conducts dialogues and exchanges, organizes domestic enterprises to participate in exhibition activities, and communicates with representatives from other countries.

2. Co-sponsored with the International Organization for Standardization's Personal Protective Equipment Technical Committee Respiratory Protection Branch (ISO TC94/SC15), the National Institute of Occupational Safety and Health (NIOSH), the International Association for Respiratory Protection (ISRP), and the International Association for Occupational Health (IOHA) International "Healthy Breath Day" activity.

In order to improve the scientific and technological level of respiratory protective equipment, the people of all countries are urged to strengthen their respiratory environment and raise their awareness of self-protection to reduce the harm of respiratory occupational diseases. In September 2017, the alliance with the International Organization for Standardization Organization's Personal Protective Equipment Technical Committee Respiratory Protection Branch (ISO TC94) /SC15), National Institute of Occupational Safety and Health (NIOSH), International Association for Respiratory Protection (ISRP), International Occupational Hygiene Association (IOHA) co-sponsored the theme event “2017 Healthy Breathing Day” in Shanghai. It signed a memorandum of cooperation with the above four international organizations and established a comprehensive strategic partnership. It is scheduled to be held on September 5 each year in China and the United States, striving to build the “Healthy Breathing Day” event into the most authoritative and influential international annual event in the field of respiratory protection.

end:

Under the background of the continuous development and progress of the labor protection product industry in China, the alliance will continue to adopt a fair and open attitude, giving Chinese and foreign companies the same power, giving full play to the strength of all sectors of society to promote the development of the labor protection product industry in China; the alliance actively engages in major mainstream media. Full cooperation, give full play to the leading role of the mainstream media, create a good atmosphere in the whole society concerned with safety, and pay attention to occupational protection; thereby expanding labor protection supplies node activities (such as "5.21" International Protective Clothing Day, "9.5" International Breathing Day) The influence. The alliance will continue to actively "bunch" as a corporate endorsement, vocalize to the competent government departments, help companies obtain more appeal channels, expand the right to speak and so on. The China Federation of Labor Protective Equipment will continue to strengthen and perfect all aspects of work and promote the overall improvement and development of the quality of labor protection products in China.