Resin Concrete Floor Drainage Channel Trench Drain

Product Description:
1) Polymeric concrete is a durable channel with high strength and chemical resistance. It is long lasting and

has no hazard to environment, so can widely used for drainage systems.

2) All our channels are made of polymer concrete, 1000mm long and the CO (internal width) is from 100mm

to 300mm, comply with EN1433, class from A15 to E600. About the grating material we usually use cast iron,

stainless steel and galvanized steel.

3) The versatility of our channels allow application to reach from residential, Commercial, industrial to agricultural bungalows, condominiums, gardens, pedestrian and cyclist areas, driven roads, car-parks, highways, industrial areas, etc.



 

1) The material is polymer concrete, more lightweight, non-freezing.

2) Flat surfaces for a smooth-flowing of liquids, avoiding, at the same time, internal sediment of any kind

of substances.

3) Polymer concrete has better strength to corrosion, chemical agents and loadings.

4) The polymer concrete drainage channels' water absorption below the 0.3%.

5) Possible to carry out very small handcrafts with good accuracy.







Application Areas:


Related Product:
Our grating usually made by cast iron, galvanized steel, stainless steel. We also have our own factory which focus on the supply of grates.




Quality Inspection:

EN1433  CERTIFICATE , ISO 90001 CERTIFICATE



Company Information:
 

Founded in 2001, we have positioned in the middle & high-end market in the field of PET preform products, which are extensively used for cosmetics bottles, water & beverage bottles, pesticide bottles, cream bottles, etc. We serve for both domestic and abroad well-known brands.
 

 

Oil Drilling Rig

With the continuous development of drilling production, the use conditions of drilling rigs have become more and more diversified, and various types of drilling rigs have appeared accordingly. Factors affecting the type and composition of drilling rigs include drilling method, drilling depth, borehole size and drilling tool size, and drilling area conditions (such as electricity or fuel, transportation, and meteorological conditions).
1. According to drilling method
(1) Impact drilling rigs, such as wire rope impact drilling rigs (drilling rigs), vibration drilling rigs, etc.
(2) Rotary drilling rigs, such as those used in rotary drilling.
(3) Downhole power drilling tools, such as rotary drilling tools, turbo drilling tools, screw drilling tools, electric drilling tools, etc.
2. Divided by drilling depth
(1) Ultra-deep well drilling rig. It adopts a drilling rig with a diameter of 114 mm drill pipe, a nominal drilling depth range of more than 7000 meters, and a maximum hook load of more than 4,500 kN.
(2) Deep well drilling rig. The drill rod is 114 mm in diameter, the nominal drilling depth is 4000-7000 meters or more, and the maximum hook load is 2250-4500 kN or more.
(3) Drilling rigs for medium and deep wells. It adopts a drilling rig with a diameter of 114 mm drill pipe, a nominal drilling depth range of 1500-4000 meters or more, and a maximum hook load of 900-2250 kN or more.
Three, according to power equipment
(1) Diesel Engine-driven drilling rigs, which use diesel engines as power through mechanical transmission or hydraulic transmission.
(2) AC driven drilling rig, suitable for use in oil fields with industrial power grids.
(3) The drilling rig is driven by direct current, and the working unit is driven by a direct current motor.
Fourth, according to the driving mode
(1) Drive alone. Each working machine is driven by generators of different sizes, which are mostly used for electric drive. The transmission is simple and easy to install, but the power utilization rate is low and the total equipment mass is large.
(2) Unified drive. The three working units of drawworks, drilling Pump and turntable are driven by the same power unit. Most drilling rigs use this scheme. The unified drive can also include only one drilling pump, and the other drilling pump is driven separately. The unified drive drilling rig has high power utilization and can be adjusted mutually when the engine fails, but the transmission is complicated, installation and adjustment are troublesome, and the transmission efficiency is low.
(3) Group drive. The combination of power is between individual drive and unified drive. There are two options for three working machines. The power utilization rate of this kind of drilling rig is higher than that of a single drive, and the transmission ratio is simple to drive in a unified manner. Two sets of working machines can also be installed on different heights and scattered sites.

Oil Drilling Rigs,Mine Drilling Rigs,Water Well Drilling Rigs,Exploration Drilling Rigs

Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaoumachinery.com