Stabilized soil mixing stations have certain order requirements regardless of whether they are automatically or manually turned on or off.
Operation requirements for stabilized soil mixing stations

Stabilized soil mixing stations have certain order requirements regardless of whether they are automatically or manually turned on or off. The order of starting up is: mixer, inclined belt conveyor, flat belt conveyor, No. 1 feeder, No. 2 feeder, No. 3 feeder, No. 4 feeder, No. 5 feeder. The shutdown sequence is: No. 1 feeder to No. 5 feeder, first shut down at the same time, then delay the shutdown in the order of flat belt conveyor, inclined belt conveyor and mixer. Technical operation requirements:
1. Check whether the solid parts of the stabilized soil mixing station are firmly connected.

2. Handle the rotating parts of the stabilized soil mixing station by hand to check whether the rotation is flexible and whether there is a card issuance.

3. Check whether the lubricating oil of each reducer in the stabilized soil mixing station is added to the specified capacity and lubricate the lubrication points.

4. Check if the connection of each line connector in the stabilized soil mixing station console is loose. Forced mixer

5. Check the opening and closing of the door opening mechanism of each belt feeder of the stabilized soil mixing station. The whole process should be adjusted without jamming, and the belt runs smoothly without any movement. Check whether the automatic control device of the silo vibrator is sensitive and speed
Is it reliable? The Screw conveyor should run smoothly and be reliable. The positioner is responsive and reliable.

6. Check the working condition of the water supply system of the stabilized soil mixing station: adjust the whole process, observe the working condition of the water spray pipe and the flow meter, and be sensitive. Check whether the joints of the pipelines and valves are sealed.
Rely on, no leakage.

7. The operation of the stirrer of the stabilized soil mixing station should be stable and there is no jamming.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Hex Nut

Brass knurled thread insert Made of material, good thermal conductivity and heat resistance.

Widely Used On the Injection molding for Tightly Fixing.

Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.

China leading manufacturers and suppliers of Hex Nut,Hexagonal Nut, and we are specialize in Stainless Steel Nuts,Hex Nut Bolt, etc.

Brass hex nut,hex coupling nut,hex flange nut,hex thin nut,hex bolts and nut

Shenzhen Lanejoy Technology Co.,LTD , https://www.ccls-vaccine.com