Introduction to antique brick

Antique bricks are not products of China's ceramics industry and are imported from abroad. Antique bricks evolved from glazed tiles and are essentially glazed porcelain tiles. Compared with ordinary glazed tiles, the difference is mainly reflected in the color of the glaze. The antique tiles belong to ordinary tiles, which are basically the same as the magnetic plates. The so-called antiques refer to the effect of bricks, which should be called antique effect tiles. Antique bricks are not difficult to clean. The only difference is that during the firing process, the technical content of antique bricks is relatively high. After thousands of tons of hydraulic presses are pressed, they are sintered at a high temperature of 1000 degrees to make them have high strength and strong wear resistance. Antique bricks are both waterproof, non-slip and corrosion resistant.

Antique brick

English: RUSTIC TILES

The antique bricks are used to imitate the old style, attracting people's attention with the unique charm of the classical. In order to reflect the vicissitudes of the years and the heavy history, the antique bricks create a nostalgic atmosphere through style, color and pattern.

Ancient built antique brick: fired from pure clay; it is blue-gray by the process of “drinking water”; it is different from ordinary antique tiles (such as porcelain tiles, vitrified tiles, etc.). Elegant, calm, simple, natural, quiet beauty; with "breathability, water absorption, anti-oxidation, air purification" and other characteristics, is an ideal decorative material for house walls and pavement decoration. In recent years, it has become one of the products that designers highly recommend.

The main specifications are: 60 × 240mm, 75 × 300mm, 100 × 400mm, 400 × 400mm, 500 × 500mm, 300 × 600mm

Metallurgical Machinery Bearings

Bearings play an important role in the metallurgical industry, mainly in the following aspects:

1. Equipment operation: The metallurgical industry uses a large number of rotating equipment, such as rolling mills, ovens, cooling equipment, etc., and the normal operation of these equipment is inseparable from the support and guarantee of bearings. Bearings can reduce the friction and wear of equipment, improve the reliability and operation efficiency of equipment.

2. Load bearing: The equipment in the metallurgical industry usually needs to bear heavy loads, and the bearings can bear and distribute these loads to ensure the stable operation of the equipment. For example, in the rolling process, bearings are subjected to high temperatures, high speeds and large loads, which can ensure the normal operation of the rolling mill.

3. Temperature and environmental adaptability: The working environment of the metallurgical industry is usually harsh, such as high temperature, high humidity, corrosive gas, etc., and the bearing needs to have good high temperature resistance, corrosion resistance and other characteristics to adapt to these harsh environments.

4. Energy saving and emission reduction: The optimal design and selection of bearings can reduce energy consumption and emissions, and improve the energy utilization rate of equipment. For example, the use of low-friction bearings and high-efficiency sealing structures can reduce energy consumption and lubricant consumption.

To sum up, bearings in the metallurgical industry not only ensure the normal operation of equipment, but also improve the reliability, stability and energy efficiency of equipment, and play an important supporting role in the development of the metallurgical industry

Metallurgical Machinery Bearings,Equipment Metallurgical Bearings,Bearings For Metallurgical Machinery,Equipment Metallurgical Bearing

Hebei Fangqiang bearing manufacturing Co., LTD , https://www.fangqiangbearing.com